Visual Basic, VB6, VB.NET, VB 2005, VB CodeS-SourceS

CodeS-SourceS est hébergé par Frontier.fr

Ce site au démarrage

begin process at 2012 02 13 08:13:59

Accueil Codes Tutoriels Forum Livres Emploi Services Connexion

Trouver un code source :

dans

[ Dernières recherches ]

Accueil > Forum >

Plusieurs SPLIT consécutifs

Poser une question dans le forum ou lancer une discussion

Plusieurs SPLIT consécutifs

mercredi 1 février 2006 à 09:14:14 | Plusieurs SPLIT consécutifs

benoit_epfl

7 msg

Salut!!

Voici une petite partie de mon code...

    Do While Not TextStream.AtEndOfStream
        TS = TextStream.ReadLine
        If TS <> "" Then Texte = Texte & TS ' & NewLine
    Loop
    TextStream.Close

    Dim Tablo() As String
    TabloChapitre = Split(Texte, "Chapitre ")

J'aimerai pouvoir splitter à nouveau chaque valeur de mon tableau TabloChapitre et en quelque sorte rajouter une dimension à mon tableau pour mettre les résultats...

For i=0 to Ubound(TabloChapitre,1)-1
   TabloChapitre(i)=Split(TabloChapitre(i),"Description Name: ")
Next

Bien sûr, ce code ne fonctionne pas, mais voilà en gros ce que je voudrais réaliser...

Si quelqu'un a une petite idée pour me faire avancer!! Merci beaucoup!

mercredi 1 février 2006 à 10:19:07 | Re : Plusieurs SPLIT consécutifs

CanisLupus

3748 msg

Salut, en passant par un type utilisateur, ça peut se faire :

Type MonType
TabloDescription() As String
End Type

Dim TabloChapitre() As MonType
Dim Tablo() As String

Tablo = Split(Texte, "Chapitre ")

ReDim TabloChapitre(UBound(Tablo))

For i = 0 To UBound(Tablo)
TabloChapitre(i).TabloDescription = Split(Tablo(i), "Description Name: ")
Next

-------------------------------------------------
Dresseur de puces, .... normal pour un loup !?

mercredi 1 février 2006 à 11:12:26 | Re : Plusieurs SPLIT consécutifs

benoit_epfl

7 msg

Salut!

Merci pour la réponse! Je dois encore splitter sur 2 ou 3 niveaux et ça se complique!!
J'avais également avancé de mon coté en utilisant des tableaux imbriqués de type Variant, mais ce n'est pas simple à gérer...

A+

mercredi 1 février 2006 à 13:11:46 | Re : Plusieurs SPLIT consécutifs

CanisLupus

3748 msg

Aie, effectivement, ça doit se compliquer sacrément.
Tu peux toujours utiliser le même principe du type utilisateur, genre :

type t1
   tablo1() as string
end type

type t2
   tablo2() as t1
end type

type t3
   tablo3() as t2
end type

etc...

dim tablo() as t3

Mais, finalement, où veux-tu en venir ?

-------------------------------------------------
Dresseur de puces, .... normal pour un loup !?

mercredi 1 février 2006 à 14:15:16 | Re : Plusieurs SPLIT consécutifs

benoit_epfl

7 msg

En fait, je peux parser le fichier suivant, pour extraire un fichier XML... Je dois dire que je galère!!!
Le fichier est organisé en chapitres, sous-chapitres, mots clés + quelques objets à insérer dans la structure...

Chapitre NC_RESOURCES
Keyword Name (type= String)
without a default value.
Nombre de description: 4
Description Name: NC_TOOLS
It's a subChapter
This Description has no preview!
This Description has no objectFilter!
Object Name: C:\temp\TEST3.catalog
It's a instance.
This description is not computed.
Keyword Name (value = NC_TOOLS )

Description Name: NC_INSERTS
It's a subChapter
This Description has no preview!
This Description has no objectFilter!
Object Name: C:\temp\TEST3.catalog
It's a instance.
This description is not computed.
Keyword Name (value = NC_INSERTS )

Description Name: NC_TOOL_ASSEMBLIES
It's a subChapter
This Description has no preview!
This Description has no objectFilter!
Object Name: C:\temp\TEST3.catalog
It's a instance.
This description is not computed.
Keyword Name (value = NC_TOOL_ASSEMBLIES )

Description Name: NC_CORRECTORS
It's a subChapter
This Description has no preview!
This Description has no objectFilter!
Object Name: C:\temp\TEST3.catalog
It's a instance.
This description is not computed.
Keyword Name (value = NC_CORRECTORS )

NC_RESOURCES

Chapitre NC_TOOLS
Keyword Name (type= String)
without a default value.
Nombre de description: 25
Description Name: MfgDrillTool
It's a subChapter
Name of the preview: I_MfgDrillTool
This Description has no objectFilter!
Object Name: C:\temp\TEST3.catalog
It's a instance.
This description is not computed.
Keyword Name (value = MfgDrillTool )

Description Name: MfgCenterDrillTool
It's a subChapter
Name of the preview: I_MfgCenterDrillTool
This Description has no objectFilter!
Object Name: C:\temp\TEST3.catalog
It's a instance.
This description is not computed.
Keyword Name (value = MfgCenterDrillTool )

Description Name: MfgBoringBarTool
It's a subChapter
Name of the preview: I_MfgBoringBarTool
This Description has no objectFilter!
Object Name: C:\temp\TEST3.catalog
It's a instance.
This description is not computed.
Keyword Name (value = MfgBoringBarTool )

Description Name: MfgMultiDiamDrillTool
It's a subChapter
Name of the preview: I_MfgMultiDiamDrillTool
This Description has no objectFilter!
Object Name: C:\temp\TEST3.catalog
It's a instance.
This description is not computed.
Keyword Name (value = MfgMultiDiamDrillTool )

Description Name: MfgBoringAndChamferingTool
It's a subChapter
Name of the preview: I_MfgBoringAndChamferingTool
This Description has no objectFilter!
Object Name: C:\temp\TEST3.catalog
It's a instance.
This description is not computed.
Keyword Name (value = MfgBoringAndChamferingTool )

Description Name: MfgCountersinkTool
It's a subChapter
Name of the preview: I_MfgCountersinkTool
This Description has no objectFilter!
Object Name: C:\temp\TEST3.catalog
It's a instance.
This description is not computed.
Keyword Name (value = MfgCountersinkTool )

Description Name: MfgReamerTool
It's a subChapter
Name of the preview: I_MfgReamerTool
This Description has no objectFilter!
Object Name: C:\temp\TEST3.catalog
It's a instance.
This description is not computed.
Keyword Name (value = MfgReamerTool )

Description Name: MfgTapTool
It's a subChapter
Name of the preview: I_MfgTapTool
This Description has no objectFilter!
Object Name: C:\temp\TEST3.catalog
It's a instance.
This description is not computed.
Keyword Name (value = MfgTapTool )

Description Name: MfgSpotDrillTool
It's a subChapter
Name of the preview: I_MfgSpotDrillTool
This Description has no objectFilter!
Object Name: C:\temp\TEST3.catalog
It's a instance.
This description is not computed.
Keyword Name (value = MfgSpotDrillTool )

Description Name: MfgTwoSidesChamferingTool
It's a subChapter
Name of the preview: I_MfgTwoSidesChamferingTool
This Description has no objectFilter!
Object Name: C:\temp\TEST3.catalog
It's a instance.
This description is not computed.
Keyword Name (value = MfgTwoSidesChamferingTool )

Description Name: MfgThreadMillTool
It's a subChapter
Name of the preview: I_MfgThreadMillTool
This Description has no objectFilter!
Object Name: C:\temp\TEST3.catalog
It's a instance.
This description is not computed.
Keyword Name (value = MfgThreadMillTool )

Description Name: MfgCounterboreMillTool
It's a subChapter
Name of the preview: I_MfgCounterboreMillTool
This Description has no objectFilter!
Object Name: C:\temp\TEST3.catalog
It's a instance.
This description is not computed.
Keyword Name (value = MfgCounterboreMillTool )

Description Name: MfgConicalMillTool
It's a subChapter
Name of the preview: I_MfgConicalMillTool
This Description has no objectFilter!
Object Name: C:\temp\TEST3.catalog
It's a instance.
This description is not computed.
Keyword Name (value = MfgConicalMillTool )

Description Name: MfgEndMillTool
It's a subChapter
Name of the preview: I_MfgEndMillTool
This Description has no objectFilter!
Object Name: C:\temp\TEST3.catalog
It's a instance.
This description is not computed.
Keyword Name (value = MfgEndMillTool )

Description Name: MfgFaceMillTool
It's a subChapter
Name of the preview: I_MfgFaceMillTool
This Description has no objectFilter!
Object Name: C:\temp\TEST3.catalog
It's a instance.
This description is not computed.
Keyword Name (value = MfgFaceMillTool )

Description Name: MfgTSlotterTool
It's a subChapter
Name of the preview: I_MfgTSlotterTool
This Description has no objectFilter!
Object Name: C:\temp\TEST3.catalog
It's a instance.
This description is not computed.
Keyword Name (value = MfgTSlotterTool )

Description Name: MfgExternalTool
It's a subChapter
Name of the preview: I_MfgExternalTool
This Description has no objectFilter!
Object Name: C:\temp\TEST3.catalog
It's a instance.
This description is not computed.
Keyword Name (value = MfgExternalTool )

Description Name: MfgInternalTool
It's a subChapter
Name of the preview: I_MfgInternalTool
This Description has no objectFilter!
Object Name: C:\temp\TEST3.catalog
It's a instance.
This description is not computed.
Keyword Name (value = MfgInternalTool )

Description Name: MfgGrooveExternalTool
It's a subChapter
Name of the preview: I_MfgGrooveExternalTool
This Description has no objectFilter!
Object Name: C:\temp\TEST3.catalog
It's a instance.
This description is not computed.
Keyword Name (value = MfgGrooveExternalTool )

Description Name: MfgGrooveInternalTool
It's a subChapter
Name of the preview: I_MfgGrooveInternalTool
This Description has no objectFilter!
Object Name: C:\temp\TEST3.catalog
It's a instance.
This description is not computed.
Keyword Name (value = MfgGrooveInternalTool )

Description Name: MfgGrooveFrontalTool
It's a subChapter
Name of the preview: I_MfgGrooveFrontalTool
This Description has no objectFilter!
Object Name: C:\temp\TEST3.catalog
It's a instance.
This description is not computed.
Keyword Name (value = MfgGrooveFrontalTool )

Description Name: MfgThreadExternalTool
It's a subChapter
Name of the preview: I_MfgThreadExternalTool
This Description has no objectFilter!
Object Name: C:\temp\TEST3.catalog
It's a instance.
This description is not computed.
Keyword Name (value = MfgThreadExternalTool )

Description Name: MfgThreadInternalTool
It's a subChapter
Name of the preview: I_MfgThreadInternalTool
This Description has no objectFilter!
Object Name: C:\temp\TEST3.catalog
It's a instance.
This description is not computed.
Keyword Name (value = MfgThreadInternalTool )

Description Name: MfgWireEDMTool
It's a subChapter
Name of the preview: I_MfgWireEDMTool
This Description has no objectFilter!
Object Name: C:\temp\TEST3.catalog
It's a instance.
This description is not computed.
Keyword Name (value = MfgWireEDMTool )

Description Name: MfgLaserBeam
It's a subChapter
Name of the preview: I_MfgLaserBeam
This Description has no objectFilter!
Object Name: C:\temp\TEST3.catalog
It's a instance.
This description is not computed.
Keyword Name (value = MfgLaserBeam )

NC_TOOLS

Chapitre MfgDrillTool
Keyword MFG_ORIGINAL_ID (type= String)
without a default value.
Keyword MFG_REPOSITORY_SOURCE (type= String)
without a default value.
Keyword MFG_TOOL_NUMBER (type= Integer)
without a default value.
Keyword MFG_COMMENT (type= String)
without a default value.
Keyword MFG_NAME (type= String)
without a default value.
Keyword MFG_CUT_ANGLE (type= ANGLE)
without a default value.
Keyword MFG_TL_TIP_LGTH (type= LENGTH)
without a default value.
Keyword MFG_BODY_DIAM (type= LENGTH)
without a default value.
Keyword MFG_CUT_LENGTH (type= LENGTH)
without a default value.
Keyword MFG_LENGTH (type= LENGTH)
without a default value.
Keyword MFG_OVERALL_LGTH (type= LENGTH)
without a default value.
Keyword MFG_NOMINAL_DIAM (type= LENGTH)
without a default value.
Keyword MFG_TOOTH_MAT (type= String)
without a default value.
Keyword MFG_MACH_QUALITY (type= String)
without a default value.
Keyword MFG_WAY_OF_ROT (type= String)
without a default value.
Keyword MFG_TOOTH_MATDES (type= String)
without a default value.
Keyword MFG_TOOTH_DES (type= String)
without a default value.
Keyword MFG_NB_OF_FLUTES (type= Integer)
without a default value.
Keyword MFG_RADIAL_TL_RAKE_ANG (type= ANGLE)
without a default value.
Keyword MFG_TL_RAKE_ANG (type= ANGLE)
without a default value.
Keyword MFG_MAX_MIL_TIME (type= TIME)
without a default value.
Keyword MFG_MAX_MIL_LENGTH (type= LENGTH)
without a default value.
Keyword MFG_WEIGHT_SNTX (type= String)
without a default value.
Keyword MFG_COOLNT_SNTX (type= String)
without a default value.
Keyword MFG_SZ_GLOBAL (type= ANGULARFEEDRATE)
without a default value.
Keyword MFG_VC_NEW (type= LINEARSPINDLESPEED)
without a default value.
Keyword MFG_MAX_FEEDRATE (type= LINEARFEEDRATE)
without a default value.
Keyword MFG_PP (type= LENGTH)
without a default value.
Keyword MFG_SZ (type= ANGULARFEEDRATE)
without a default value.
Keyword MFG_VC (type= LINEARFEEDRATE)
without a default value.
Nombre de description: 0
MfgDrillTool

Chapitre MfgCenterDrillTool
Keyword MFG_ORIGINAL_ID (type= String)
without a default value.
Keyword MFG_REPOSITORY_SOURCE (type= String)
without a default value.
Keyword MFG_TOOL_NUMBER (type= Integer)
without a default value.
Keyword MFG_COMMENT (type= String)
without a default value.
Keyword MFG_NAME (type= String)
without a default value.
Keyword MFG_TAPER_ANGLE (type= ANGLE)
without a default value.
Keyword MFG_CUT_ANGLE (type= ANGLE)
without a default value.
Keyword MFG_BODY_DIAM (type= LENGTH)
without a default value.
Keyword MFG_CUT_LENGTH (type= LENGTH)
without a default value.
Keyword MFG_LENGTH (type= LENGTH)
without a default value.
Keyword MFG_OVERALL_LGTH (type= LENGTH)
without a default value.
Keyword MFG_NOMINAL_DIAM (type= LENGTH)
without a default value.
Keyword MFG_TOOTH_MAT (type= String)
without a default value.
Keyword MFG_WAY_OF_ROT (type= String)
without a default value.
Keyword MFG_SIZE_DESIGN (type= String)
without a default value.
Keyword MFG_RADIAL_TL_RAKE_ANG (type= ANGLE)
without a default value.
Keyword MFG_TL_RAKE_ANG (type= ANGLE)
without a default value.
Keyword MFG_MAX_MIL_TIME (type= TIME)
without a default value.
Keyword MFG_MAX_MIL_LENGTH (type= LENGTH)
without a default value.
Keyword MFG_WEIGHT_SNTX (type= String)
without a default value.
Keyword MFG_COOLNT_SNTX (type= String)
without a default value.
Keyword MFG_SZ_GLOBAL (type= ANGULARFEEDRATE)
without a default value.
Keyword MFG_VC_NEW (type= LINEARSPINDLESPEED)
without a default value.
Keyword MFG_MAX_FEEDRATE (type= LINEARFEEDRATE)
without a default value.
Keyword MFG_PP (type= LENGTH)
without a default value.
Keyword MFG_SZ (type= ANGULARFEEDRATE)
without a default value.
Keyword MFG_VC (type= LINEARFEEDRATE)
without a default value.
Nombre de description: 0
MfgCenterDrillTool

Chapitre MfgBoringBarTool
Keyword MFG_ORIGINAL_ID (type= String)
without a default value.
Keyword MFG_REPOSITORY_SOURCE (type= String)
without a default value.
Keyword MFG_TOOL_NUMBER (type= Integer)
without a default value.
Keyword MFG_COMMENT (type= String)
without a default value.
Keyword MFG_NAME (type= String)
without a default value.
Keyword MFG_TOOL_ANGLE (type= ANGLE)
without a default value.
Keyword MFG_TIP_ANGLE (type= ANGLE)
without a default value.
Keyword MFG_CUT_ANGLE (type= ANGLE)
without a default value.
Keyword MFG_TIP_RADIUS (type= LENGTH)
without a default value.
Keyword MFG_TIP_LENGTH (type= LENGTH)
without a default value.
Keyword MFG_MAX_DIAMETER (type= LENGTH)
without a default value.
Keyword MFG_MIN_DIAMETER (type= LENGTH)
without a default value.
Keyword MFG_NON_CUT_DIAM (type= LENGTH)
without a default value.
Keyword MFG_TL_TIP_LGTH (type= LENGTH)
without a default value.
Keyword MFG_BODY_DIAM (type= LENGTH)
without a default value.
Keyword MFG_CUT_LENGTH (type= LENGTH)
without a default value.
Keyword MFG_LENGTH (type= LENGTH)
without a default value.
Keyword MFG_OVERALL_LGTH (type= LENGTH)
without a default value.
Keyword MFG_NOMINAL_DIAM (type= LENGTH)
without a default value.
Keyword MFG_BORE_ABILITY (type= String)
without a default value.
Keyword MFG_COMPOSITION (type= String)
without a default value.
Keyword MFG_MACH_QUALITY (type= String)
without a default value.
Keyword MFG_TOOTH_MAT (type= String)
without a default value.
Keyword MFG_WAY_OF_ROT (type= String)
without a default value.
Keyword MFG_TOOTH_MATDES (type= String)
without a default value.
Keyword MFG_TOOTH_DES (type= String)
without a default value.
Keyword MFG_RADIAL_TL_RAKE_ANG (type= ANGLE)
without a default value.
Keyword MFG_TL_RAKE_ANG (type= ANGLE)
without a default value.
Keyword MFG_MAX_MIL_TIME (type= TIME)
without a default value.
Keyword MFG_MAX_MIL_LENGTH (type= LENGTH)
without a default value.
Keyword MFG_WEIGHT_SNTX (type= String)
without a default value.
Keyword MFG_COOLNT_SNTX (type= String)
without a default value.
Keyword MFG_SZ_GLOBAL (type= ANGULARFEEDRATE)
without a default value.
Keyword MFG_VC_NEW (type= LINEARSPINDLESPEED)
without a default value.
Keyword MFG_MAX_FEEDRATE (type= LINEARFEEDRATE)
without a default value.
Keyword MFG_PP (type= LENGTH)
without a default value.
Keyword MFG_SZ (type= ANGULARFEEDRATE)
without a default value.
Keyword MFG_VC (type= LINEARFEEDRATE)
without a default value.
Nombre de description: 0
MfgBoringBarTool

Chapitre MfgMultiDiamDrillTool
Keyword MFG_NB_OF_STAGES (type= Integer)
without a default value.
Keyword MFG_ORIGINAL_ID (type= String)
without a default value.
Keyword MFG_REPOSITORY_SOURCE (type= String)
without a default value.
Keyword MFG_TOOL_NUMBER (type= Integer)
without a default value.
Keyword MFG_COMMENT (type= String)
without a default value.
Keyword MFG_NAME (type= String)
without a default value.
Keyword MFG_ANGLE2 (type= ANGLE)
without a default value.
Keyword MFG_TAPER_ANGLE (type= ANGLE)
without a default value.
Keyword MFG_CUT_ANGLE (type= ANGLE)
without a default value.
Keyword MFG_CHAMFR_DIAM2 (type= LENGTH)
without a default value.
Keyword MFG_CHAMFR_DIAM1 (type= LENGTH)
without a default value.
Keyword MFG_LENGTH_2 (type= LENGTH)
without a default value.
Keyword MFG_LENGTH_1 (type= LENGTH)
without a default value.
Keyword MFG_TL_TIP_LGTH (type= LENGTH)
without a default value.
Keyword MFG_BODY_DIAM (type= LENGTH)
without a default value.
Keyword MFG_CUT_LENGTH (type= LENGTH)
without a default value.
Keyword MFG_LENGTH (type= LENGTH)
without a default value.
Keyword MFG_OVERALL_LGTH (type= LENGTH)
without a default value.
Keyword MFG_NOMINAL_DIAM (type= LENGTH)
without a default value.
Keyword MFG_MACH_QUALITY (type= String)
without a default value.
Keyword MFG_TOOTH_MAT (type= String)
without a default value.
Keyword MFG_WAY_OF_ROT (type= String)
without a default value.
Keyword MFG_TOOTH_MATDES (type= String)
without a default value.
Keyword MFG_TOOTH_DES (type= String)
without a default value.
Keyword MFG_NB_OF_FLUTES (type= Integer)
without a default value.
Keyword MFG_RADIAL_TL_RAKE_ANG (type= ANGLE)
without a default value.
Keyword MFG_TL_RAKE_ANG (type= ANGLE)
without a default value.
Keyword MFG_MAX_MIL_TIME (type= TIME)
without a default value.
Keyword MFG_MAX_MIL_LENGTH (type= LENGTH)
without a default value.
Keyword MFG_WEIGHT_SNTX (type= String)
without a default value.
Keyword MFG_COOLNT_SNTX (type= String)
without a default value.
Keyword MFG_SZ_GLOBAL (type= ANGULARFEEDRATE)
without a default value.
Keyword MFG_VC_NEW (type= LINEARSPINDLESPEED)
without a default value.
Keyword MFG_MAX_FEEDRATE (type= LINEARFEEDRATE)
without a default value.
Keyword MFG_PP (type= LENGTH)
without a default value.
Keyword MFG_SZ (type= ANGULARFEEDRATE)
without a default value.
Keyword MFG_VC (type= LINEARFEEDRATE)
without a default value.
Nombre de description: 0
MfgMultiDiamDrillTool

Chapitre MfgBoringAndChamferingTool
Keyword MFG_ORIGINAL_ID (type= String)
without a default value.
Keyword MFG_REPOSITORY_SOURCE (type= String)
without a default value.
Keyword MFG_TOOL_NUMBER (type= Integer)
without a default value.
Keyword MFG_COMMENT (type= String)
without a default value.
Keyword MFG_NAME (type= String)
without a default value.
Keyword MFG_TAPER_ANGLE (type= ANGLE)
without a default value.
Keyword MFG_CHAMFR_DIAM1 (type= LENGTH)
without a default value.
Keyword MFG_LENGTH_1 (type= LENGTH)
without a default value.
Keyword MFG_CORNER_RAD (type= LENGTH)
without a default value.
Keyword MFG_BODY_DIAM (type= LENGTH)
without a default value.
Keyword MFG_CUT_LENGTH (type= LENGTH)
without a default value.
Keyword MFG_LENGTH (type= LENGTH)
without a default value.
Keyword MFG_OVERALL_LGTH (type= LENGTH)
without a default value.
Keyword MFG_NOMINAL_DIAM (type= LENGTH)
without a default value.
Keyword MFG_TOOTH_MAT (type= String)
without a default value.
Keyword MFG_MACH_QUALITY (type= String)
without a default value.
Keyword MFG_WAY_OF_ROT (type= String)
without a default value.
Keyword MFG_TOOTH_MATDES (type= String)
without a default value.
Keyword MFG_TOOTH_DES (type= String)
without a default value.
Keyword MFG_NB_OF_FLUTES (type= Integer)
without a default value.
Keyword MFG_RADIAL_TL_RAKE_ANG (type= ANGLE)
without a default value.
Keyword MFG_TL_RAKE_ANG (type= ANGLE)
without a default value.
Keyword MFG_MAX_MIL_TIME (type= TIME)
without a default value.
Keyword MFG_MAX_MIL_LENGTH (type= LENGTH)
without a default value.
Keyword MFG_WEIGHT_SNTX (type= String)
without a default value.
Keyword MFG_COOLNT_SNTX (type= String)
without a default value.
Keyword MFG_SZ_GLOBAL (type= ANGULARFEEDRATE)
without a default value.
Keyword MFG_VC_NEW (type= LINEARSPINDLESPEED)
without a default value.
Keyword MFG_MAX_FEEDRATE (type= LINEARFEEDRATE)
without a default value.
Keyword MFG_PP (type= LENGTH)
without a default value.
Keyword MFG_SZ (type= ANGULARFEEDRATE)
without a default value.
Keyword MFG_VC (type= LINEARFEEDRATE)
without a default value.
Nombre de description: 0
MfgBoringAndChamferingTool

Chapitre MfgCountersinkTool
Keyword MFG_ORIGINAL_ID (type= String)
without a default value.
Keyword MFG_REPOSITORY_SOURCE (type= String)
without a default value.
Keyword MFG_TOOL_NUMBER (type= Integer)
without a default value.
Keyword MFG_COMMENT (type= String)
without a default value.
Keyword MFG_NAME (type= String)
without a default value.
Keyword MFG_CUT_ANGLE (type= ANGLE)
without a default value.
Keyword MFG_ENTRY_DIAM (type= LENGTH)
without a default value.
Keyword MFG_BODY_DIAM (type= LENGTH)
without a default value.
Keyword MFG_CORNER_RAD (type= LENGTH)
without a default value.
Keyword MFG_CUT_LENGTH (type= LENGTH)
without a default value.
Keyword MFG_LENGTH (type= LENGTH)
without a default value.
Keyword MFG_OVERALL_LGTH (type= LENGTH)
without a default value.
Keyword MFG_OUTSIDE_DIAM (type= LENGTH)
without a default value.
Keyword MFG_NOMINAL_DIAM (type= LENGTH)
without a default value.
Keyword MFG_TOOTH_MAT (type= String)
without a default value.
Keyword MFG_MACH_QUALITY (type= String)
without a default value.
Keyword MFG_WAY_OF_ROT (type= String)
without a default value.
Keyword MFG_TOOTH_MATDES (type= String)
without a default value.
Keyword MFG_TOOTH_DES (type= String)
without a default value.
Keyword MFG_NB_OF_FLUTES (type= Integer)
without a default value.
Keyword MFG_RADIAL_TL_RAKE_ANG (type= ANGLE)
without a default value.
Keyword MFG_TL_RAKE_ANG (type= ANGLE)
without a default value.
Keyword MFG_MAX_MIL_TIME (type= TIME)
without a default value.
Keyword MFG_MAX_MIL_LENGTH (type= LENGTH)
without a default value.
Keyword MFG_WEIGHT_SNTX (type= String)
without a default value.
Keyword MFG_COOLNT_SNTX (type= String)
without a default value.
Keyword MFG_SZ_GLOBAL (type= ANGULARFEEDRATE)
without a default value.
Keyword MFG_VC_NEW (type= LINEARSPINDLESPEED)
without a default value.
Keyword MFG_MAX_FEEDRATE (type= LINEARFEEDRATE)
without a default value.
Keyword MFG_PP (type= LENGTH)
without a default value.
Keyword MFG_SZ (type= ANGULARFEEDRATE)
without a default value.
Keyword MFG_VC (type= LINEARFEEDRATE)
without a default value.
Nombre de description: 0
MfgCountersinkTool

Chapitre MfgReamerTool
Keyword MFG_ORIGINAL_ID (type= String)
without a default value.
Keyword MFG_REPOSITORY_SOURCE (type= String)
without a default value.
Keyword MFG_TOOL_NUMBER (type= Integer)
without a default value.
Keyword MFG_COMMENT (type= String)
without a default value.
Keyword MFG_NAME (type= String)
without a default value.
Keyword MFG_ENTRY_DIAM (type= LENGTH)
without a default value.
Keyword MFG_TL_TIP_LGTH (type= LENGTH)
without a default value.
Keyword MFG_BODY_DIAM (type= LENGTH)
without a default value.
Keyword MFG_CUT_LENGTH (type= LENGTH)
without a default value.
Keyword MFG_LENGTH (type= LENGTH)
without a default value.
Keyword MFG_OVERALL_LGTH (type= LENGTH)
without a default value.
Keyword MFG_NOMINAL_DIAM (type= LENGTH)
without a default value.
Keyword MFG_TOOTH_MAT (type= String)
without a default value.
Keyword MFG_WAY_OF_ROT (type= String)
without a default value.
Keyword MFG_TOOTH_MATDES (type= String)
without a default value.
Keyword MFG_TOOTH_DES (type= String)
without a default value.
Keyword MFG_NB_OF_FLUTES (type= Integer)
without a default value.
Keyword MFG_RADIAL_TL_RAKE_ANG (type= ANGLE)
without a default value.
Keyword MFG_TL_RAKE_ANG (type= ANGLE)
without a default value.
Keyword MFG_MAX_MIL_TIME (type= TIME)
without a default value.
Keyword MFG_MAX_MIL_LENGTH (type= LENGTH)
without a default value.
Keyword MFG_WEIGHT_SNTX (type= String)
without a default value.
Keyword MFG_COOLNT_SNTX (type= String)
without a default value.
Keyword MFG_SZ_GLOBAL (type= ANGULARFEEDRATE)
without a default value.
Keyword MFG_VC_NEW (type= LINEARSPINDLESPEED)
without a default value.
Keyword MFG_MAX_FEEDRATE (type= LINEARFEEDRATE)
without a default value.
Keyword MFG_PP (type= LENGTH)
without a default value.
Keyword MFG_SZ (type= ANGULARFEEDRATE)
without a default value.
Keyword MFG_VC (type= LINEARFEEDRATE)
without a default value.
Nombre de description: 0
MfgReamerTool

Chapitre MfgTapTool
Keyword MFG_ORIGINAL_ID (type= String)
without a default value.
Keyword MFG_REPOSITORY_SOURCE (type= String)
without a default value.
Keyword MFG_TOOL_NUMBER (type= Integer)
without a default value.
Keyword MFG_COMMENT (type= String)
without a default value.
Keyword MFG_NAME (type= String)
without a default value.
Keyword MFG_TAPER_ANGLE (type= ANGLE)
without a default value.
Keyword MFG_LENGTH_NOM_DIAM (type= LENGTH)
without a default value.
Keyword MFG_NB_OF_THREAD (type= Integer)
without a default value.
Keyword MFG_ENTRY_DIAM (type= LENGTH)
without a default value.
Keyword MFG_TL_TIP_LGTH (type= LENGTH)
without a default value.
Keyword MFG_BODY_DIAM (type= LENGTH)
without a default value.
Keyword MFG_CUT_LENGTH (type= LENGTH)
without a default value.
Keyword MFG_LENGTH (type= LENGTH)
without a default value.
Keyword MFG_OVERALL_LGTH (type= LENGTH)
without a default value.
Keyword MFG_NOMINAL_DIAM (type= LENGTH)
without a default value.
Keyword MFG_THREAD_FORM (type= String)
without a default value.
Keyword MFG_THREAD_CLASS (type= String)
without a default value.
Keyword MFG_TOOTH_MAT (type= String)
without a default value.
Keyword MFG_WAY_OF_ROT (type= String)
without a default value.
Keyword MFG_TOOTH_MATDES (type= String)
without a default value.
Keyword MFG_TOOTH_DES (type= String)
without a default value.
Keyword MFG_THD_CLS_DESC (type= String)
without a default value.
Keyword MFG_THD_FRM_DESC (type= String)
without a default value.
Keyword MFG_PITCH_OF_THREAD (type= LENGTH)
without a default value.
Keyword MFG_NB_OF_FLUTES (type= Integer)
without a default value.
Keyword MFG_RADIAL_TL_RAKE_ANG (type= ANGLE)
without a default value.
Keyword MFG_TL_RAKE_ANG (type= ANGLE)
without a default value.
Keyword MFG_MAX_MIL_TIME (type= TIME)
without a default value.
Keyword MFG_MAX_MIL_LENGTH (type= LENGTH)
without a default value.
Keyword MFG_WEIGHT_SNTX (type= String)
without a default value.
Keyword MFG_COOLNT_SNTX (type= String)
without a default value.
Keyword MFG_SZ_GLOBAL (type= ANGULARFEEDRATE)
without a default value.
Keyword MFG_VC_NEW (type= LINEARSPINDLESPEED)
without a default value.
Keyword MFG_MAX_FEEDRATE (type= LINEARFEEDRATE)
without a default value.
Keyword MFG_PP (type= LENGTH)
without a default value.
Keyword MFG_SZ (type= ANGULARFEEDRATE)
without a default value.
Keyword MFG_VC (type= LINEARFEEDRATE)
without a default value.
Nombre de description: 0
MfgTapTool

Chapitre MfgSpotDrillTool
Keyword MFG_ORIGINAL_ID (type= String)
without a default value.
Keyword MFG_REPOSITORY_SOURCE (type= String)
without a default value.
Keyword MFG_TOOL_NUMBER (type= Integer)
without a default value.
Keyword MFG_COMMENT (type= String)
without a default value.
Keyword MFG_NAME (type= String)
without a default value.
Keyword MFG_CUT_ANGLE (type= ANGLE)
without a default value.
Keyword MFG_BODY_DIAM (type= LENGTH)
without a default value.
Keyword MFG_LENGTH (type= LENGTH)
without a default value.
Keyword MFG_OVERALL_LGTH (type= LENGTH)
without a default value.
Keyword MFG_NOMINAL_DIAM (type= LENGTH)
without a default value.
Keyword MFG_TOOTH_MAT (type= String)
without a default value.
Keyword MFG_WAY_OF_ROT (type= String)
without a default value.
Keyword MFG_TOOTH_MATDES (type= String)
without a default value.
Keyword MFG_TOOTH_DES (type= String)
without a default value.
Keyword MFG_NB_OF_FLUTES (type= Integer)
without a default value.
Keyword MFG_RADIAL_TL_RAKE_ANG (type= ANGLE)
without a default value.
Keyword MFG_TL_RAKE_ANG (type= ANGLE)
without a default value.
Keyword MFG_MAX_MIL_TIME (type= TIME)
without a default value.
Keyword MFG_MAX_MIL_LENGTH (type= LENGTH)
without a default value.
Keyword MFG_WEIGHT_SNTX (type= String)
without a default value.
Keyword MFG_COOLNT_SNTX (type= String)
without a default value.
Keyword MFG_SZ_GLOBAL (type= ANGULARFEEDRATE)
without a default value.
Keyword MFG_VC_NEW (type= LINEARSPINDLESPEED)
without a default value.
Keyword MFG_MAX_FEEDRATE (type= LINEARFEEDRATE)
without a default value.
Keyword MFG_PP (type= LENGTH)
without a default value.
Keyword MFG_SZ (type= ANGULARFEEDRATE)
without a default value.
Keyword MFG_VC (type= LINEARFEEDRATE)
without a default value.
Nombre de description: 0
MfgSpotDrillTool

Chapitre MfgTwoSidesChamferingTool
Keyword MFG_ORIGINAL_ID (type= String)
without a default value.
Keyword MFG_REPOSITORY_SOURCE (type= String)
without a default value.
Keyword MFG_TOOL_NUMBER (type= Integer)
without a default value.
Keyword MFG_COMMENT (type= String)
without a default value.
Keyword MFG_NAME (type= String)
without a default value.
Keyword MFG_ANGLE2 (type= ANGLE)
without a default value.
Keyword MFG_CUT_ANGLE (type= ANGLE)
without a default value.
Keyword MFG_ENTRY_DIAM (type= LENGTH)
without a default value.
Keyword MFG_TL_TIP_LGTH (type= LENGTH)
without a default value.
Keyword MFG_BODY_DIAM (type= LENGTH)
without a default value.
Keyword MFG_CUT_LENGTH (type= LENGTH)
without a default value.
Keyword MFG_LENGTH (type= LENGTH)
without a default value.
Keyword MFG_OVERALL_LGTH (type= LENGTH)
without a default value.
Keyword MFG_NOMINAL_DIAM (type= LENGTH)
without a default value.
Keyword MFG_TOOTH_MAT (type= String)
without a default value.
Keyword MFG_WAY_OF_ROT (type= String)
without a default value.
Keyword MFG_TOOTH_MATDES (type= String)
without a default value.
Keyword MFG_TOOTH_DES (type= String)
without a default value.
Keyword MFG_NB_OF_FLUTES (type= Integer)
without a default value.
Keyword MFG_RADIAL_TL_RAKE_ANG (type= ANGLE)
without a default value.
Keyword MFG_TL_RAKE_ANG (type= ANGLE)
without a default value.
Keyword MFG_MAX_MIL_TIME (type= TIME)
without a default value.
Keyword MFG_MAX_MIL_LENGTH (type= LENGTH)
without a default value.
Keyword MFG_WEIGHT_SNTX (type= String)
without a default value.
Keyword MFG_COOLNT_SNTX (type= String)
without a default value.
Keyword MFG_SZ_GLOBAL (type= ANGULARFEEDRATE)
without a default value.
Keyword MFG_VC_NEW (type= LINEARSPINDLESPEED)
without a default value.
Keyword MFG_MAX_FEEDRATE (type= LINEARFEEDRATE)
without a default value.
Keyword MFG_PP (type= LENGTH)
without a default value.
Keyword MFG_SZ (type= ANGULARFEEDRATE)
without a default value.
Keyword MFG_VC (type= LINEARFEEDRATE)
without a default value.
Nombre de description: 0
MfgTwoSidesChamferingTool

Chapitre MfgThreadMillTool
Keyword MFG_ORIGINAL_ID (type= String)
without a default value.
Keyword MFG_REPOSITORY_SOURCE (type= String)
without a default value.
Keyword MFG_TOOL_NUMBER (type= Integer)
without a default value.
Keyword MFG_COMMENT (type= String)
without a default value.
Keyword MFG_NAME (type= String)
without a default value.
Keyword MFG_NB_OF_THREAD (type= Integer)
without a default value.
Keyword MFG_TAPER_ANGLE (type= ANGLE)
without a default value.
Keyword MFG_OUTSIDE_DIAM (type= LENGTH)
without a default value.
Keyword MFG_BODY_DIAM (type= LENGTH)
without a default value.
Keyword MFG_LENGTH_1 (type= LENGTH)
without a default value.
Keyword MFG_CUT_LENGTH (type= LENGTH)
without a default value.
Keyword MFG_LENGTH (type= LENGTH)
without a default value.
Keyword MFG_OVERALL_LGTH (type= LENGTH)
without a default value.
Keyword MFG_NOMINAL_DIAM (type= LENGTH)
without a default value.
Keyword MFG_THREAD_FORM (type= String)
without a default value.
Keyword MFG_THREAD_CLASS (type= String)
without a default value.
Keyword MFG_TOOTH_MAT (type= String)
without a default value.
Keyword MFG_WAY_OF_ROT (type= String)
without a default value.
Keyword MFG_TOOTH_MATDES (type= String)
without a default value.
Keyword MFG_TOOTH_DES (type= String)
without a default value.
Keyword MFG_THD_CLS_DESC (type= String)
without a default value.
Keyword MFG_THD_FRM_DESC (type= String)
without a default value.
Keyword MFG_PITCH_OF_THREAD (type= LENGTH)
without a default value.
Keyword MFG_NB_OF_FLUTES (type= Integer)
without a default value.
Keyword MFG_RADIAL_TL_RAKE_ANG (type= ANGLE)
without a default value.
Keyword MFG_TL_RAKE_ANG (type= ANGLE)
without a default value.
Keyword MFG_MAX_MIL_TIME (type= TIME)
without a default value.
Keyword MFG_MAX_MIL_LENGTH (type= LENGTH)
without a default value.
Keyword MFG_WEIGHT_SNTX (type= String)
without a default value.
Keyword MFG_COOLNT_SNTX (type= String)
without a default value.
Keyword MFG_SZ_GLOBAL (type= ANGULARFEEDRATE)
without a default value.
Keyword MFG_VC_NEW (type= LINEARSPINDLESPEED)
without a default value.
Keyword MFG_MAX_FEEDRATE (type= LINEARFEEDRATE)
without a default value.
Keyword MFG_PP (type= LENGTH)
without a default value.
Keyword MFG_SZ (type= ANGULARFEEDRATE)
without a default value.
Keyword MFG_VC (type= LINEARFEEDRATE)
without a default value.
Nombre de description: 0
MfgThreadMillTool

Chapitre MfgCounterboreMillTool
Keyword MFG_ORIGINAL_ID (type= String)
without a default value.
Keyword MFG_REPOSITORY_SOURCE (type= String)
without a default value.
Keyword MFG_TOOL_NUMBER (type= Integer)
without a default value.
Keyword MFG_COMMENT (type= String)
without a default value.
Keyword MFG_NAME (type= String)
without a default value.
Keyword MFG_TL_TIP_LGTH (type= LENGTH)
without a default value.
Keyword MFG_ENTRY_DIAM (type= LENGTH)
without a default value.
Keyword MFG_BODY_DIAM (type= LENGTH)
without a default value.
Keyword MFG_CUT_LENGTH (type= LENGTH)
without a default value.
Keyword MFG_LENGTH (type= LENGTH)
without a default value.
Keyword MFG_OVERALL_LGTH (type= LENGTH)
without a default value.
Keyword MFG_NOMINAL_DIAM (type= LENGTH)
without a default value.
Keyword MFG_TOOTH_MAT (type= String)
without a default value.
Keyword MFG_COMPOSITION (type= String)
without a default value.
Keyword MFG_MACH_QUALITY (type= String)
without a default value.
Keyword MFG_WAY_OF_ROT (type= String)
without a default value.
Keyword MFG_TOOTH_MATDESC (type= ANGLE)
without a default value.
Keyword MFG_TOOTH_DESC (type= ANGLE)
without a default value.
Keyword MFG_MAX_PLNG_ANG (type= ANGLE)
without a default value.
Keyword MFG_NB_OF_FLUTES (type= Integer)
without a default value.
Keyword MFG_RADIAL_TL_RAKE_ANG (type= ANGLE)
without a default value.
Keyword MFG_TL_RAKE_ANG (type= ANGLE)
without a default value.
Keyword MFG_MAX_MIL_TIME (type= TIME)
without a default value.
Keyword MFG_MAX_MIL_LENGTH (type= LENGTH)
without a default value.
Keyword MFG_WEIGHT_SNTX (type= String)
without a default value.
Keyword MFG_COOLNT_SNTX (type= String)
without a default value.
Keyword MFG_SZ_GLOBAL (type= ANGULARFEEDRATE)
without a default value.
Keyword MFG_VC_NEW (type= LINEARSPINDLESPEED)
without a default value.
Keyword MFG_MAX_FEEDRATE (type= LINEARFEEDRATE)
without a default value.
Keyword MFG_PP (type= LENGTH)
without a default value.
Keyword MFG_SZ (type= ANGULARFEEDRATE)
without a default value.
Keyword MFG_VC (type= LINEARFEEDRATE)
without a default value.
Nombre de description: 0
MfgCounterboreMillTool

Chapitre MfgConicalMillTool
Keyword MFG_BALL_TYPE (type= Boolean)
without a default value.
Keyword MFG_ORIGINAL_ID (type= String)
without a default value.
Keyword MFG_REPOSITORY_SOURCE (type= String)
without a default value.
Keyword MFG_TOOL_NUMBER (type= Integer)
without a default value.
Keyword MFG_COMMENT (type= String)
without a default value.
Keyword MFG_NAME (type= String)
without a default value.
Keyword MFG_CUT_ANGLE (type= ANGLE)
without a default value.
Keyword MFG_CORNER_RAD (type= LENGTH)
without a default value.
Keyword MFG_BODY_DIAM (type= LENGTH)
without a default value.
Keyword MFG_CUT_LENGTH (type= LENGTH)
without a default value.
Keyword MFG_LENGTH (type= LENGTH)
without a default value.
Keyword MFG_OVERALL_LGTH (type= LENGTH)
without a default value.
Keyword MFG_ENTRY_DIAM (type= LENGTH)
without a default value.
Keyword MFG_NOMINAL_DIAM (type= LENGTH)
without a default value.
Keyword MFG_COMPOSITION (type= String)
without a default value.
Keyword MFG_TOOTH_MAT (type= String)
without a default value.
Keyword MFG_MACH_QUALITY (type= String)
without a default value.
Keyword MFG_WAY_OF_ROT (type= String)
without a default value.
Keyword MFG_TOOTH_MATDES (type= String)
without a default value.
Keyword MFG_TOOTH_DES (type= String)
without a default value.
Keyword MFG_NB_OF_FLUTES (type= Integer)
without a default value.
Keyword MFG_MAX_PLNG_ANG (type= ANGLE)
without a default value.
Keyword MFG_RADIAL_TL_RAKE_ANG (type= ANGLE)
without a default value.
Keyword MFG_TL_RAKE_ANG (type= ANGLE)
without a default value.
Keyword MFG_MAX_MIL_TIME (type= TIME)
without a default value.
Keyword MFG_MAX_MIL_LENGTH (type= LENGTH)
without a default value.
Keyword MFG_WEIGHT_SNTX (type= String)
without a default value.
Keyword MFG_COOLNT_SNTX (type= String)
without a default value.
Keyword MFG_SZ_ROUGH_GLOBAL (type= ANGULARFEEDRATE)
without a default value.
Keyword MFG_VC_ROUGH_NEW (type= LINEARSPINDLESPEED)
without a default value.
Keyword MFG_SZ_FINISH_GLOBAL (type= ANGULARFEEDRATE)
without a default value.
Keyword MFG_VC_FINISH_NEW (type= LINEARSPINDLESPEED)
without a default value.
Keyword MFG_MAX_FEEDRATE (type= LINEARFEEDRATE)
without a default value.
Keyword MFG_AR_ROUGH (type= LENGTH)
without a default value.
Keyword MFG_AA_ROUGH (type= LENGTH)
without a default value.
Keyword MFG_SZ_ROUGH (type= ANGULARFEEDRATE)
without a default value.
Keyword MFG_VC_ROUGH (type= LINEARFEEDRATE)
without a default value.
Keyword MFG_AR_FINISH (type= LENGTH)
without a default value.
Keyword MFG_AA_FINISH (type= LENGTH)
without a default value.
Keyword MFG_SZ_FINISH (type= ANGULARFEEDRATE)
without a default value.
Keyword MFG_VC_FINISH (type= LINEARFEEDRATE)
without a default value.
Nombre de description: 0
MfgConicalMillTool

Chapitre MfgEndMillTool
Keyword MFG_BALL_TYPE (type= Boolean)
without a default value.
Keyword MFG_ORIGINAL_ID (type= String)
without a default value.
Keyword MFG_REPOSITORY_SOURCE (type= String)
without a default value.
Keyword MFG_TOOL_NUMBER (type= Integer)
without a default value.
Keyword MFG_COMMENT (type= String)
without a default value.
Keyword MFG_NAME (type= String)
without a default value.
Keyword MFG_EFFECTIVE_LENGTH (type= LENGTH)
without a default value.
Keyword MFG_TOOL_CORE_DIAMETER (type= LENGTH)
without a default value.
Keyword MFG_CORNER_RAD (type= LENGTH)
without a default value.
Keyword MFG_BODY_DIAM (type= LENGTH)
without a default value.
Keyword MFG_CUT_LENGTH (type= LENGTH)
without a default value.
Keyword MFG_LENGTH (type= LENGTH)
without a default value.
Keyword MFG_OVERALL_LGTH (type= LENGTH)
without a default value.
Keyword MFG_NOMINAL_DIAM (type= LENGTH)
without a default value.
Keyword MFG_TOOTH_MAT (type= String)
without a default value.
Keyword MFG_COMPOSITION (type= String)
without a default value.
Keyword MFG_MACH_QUALITY (type= String)
without a default value.
Keyword MFG_WAY_OF_ROT (type= String)
without a default value.
Keyword MFG_TOOTH_MATDESC (type= String)
without a default value.
Keyword MFG_TOOTH_DESC (type= String)
without a default value.
Keyword MFG_MAX_PLNG_ANG (type= ANGLE)
without a default value.
Keyword MFG_NB_OF_FLUTES (type= Integer)
without a default value.
Keyword MFG_RADIAL_TL_RAKE_ANG (type= ANGLE)
without a default value.
Keyword MFG_TL_RAKE_ANG (type= ANGLE)
without a default value.
Keyword MFG_MAX_MIL_TIME (type= TIME)
without a default value.
Keyword MFG_MAX_MIL_LENGTH (type= LENGTH)
without a default value.
Keyword MFG_WEIGHT_SNTX (type= String)
without a default value.
Keyword MFG_COOLNT_SNTX (type= String)
without a default value.
Keyword MFG_SZ_ROUGH_GLOBAL (type= ANGULARFEEDRATE)
without a default value.
Keyword MFG_VC_ROUGH_NEW (type= LINEARSPINDLESPEED)
without a default value.
Keyword MFG_SZ_FINISH_GLOBAL (type= ANGULARFEEDRATE)
without a default value.
Keyword MFG_VC_FINISH_NEW (type= LINEARSPINDLESPEED)
without a default value.
Keyword MFG_MAX_FEEDRATE (type= LINEARFEEDRATE)
without a default value.
Keyword MFG_AR_ROUGH (type= LENGTH)
without a default value.
Keyword MFG_AA_ROUGH (type= LENGTH)
without a default value.
Keyword MFG_SZ_ROUGH (type= ANGULARFEEDRATE)
without a default value.
Keyword MFG_VC_ROUGH (type= LINEARFEEDRATE)
without a default value.
Keyword MFG_AR_FINISH (type= LENGTH)
without a default value.
Keyword MFG_AA_FINISH (type= LENGTH)
without a default value.
Keyword MFG_SZ_FINISH (type= ANGULARFEEDRATE)
without a default value.
Keyword MFG_VC_FINISH (type= LINEARFEEDRATE)
without a default value.
Nombre de description: 0
MfgEndMillTool

Chapitre MfgFaceMillTool
Keyword MFG_ORIGINAL_ID (type= String)
without a default value.
Keyword MFG_REPOSITORY_SOURCE (type= String)
without a default value.
Keyword MFG_TOOL_NUMBER (type= Integer)
without a default value.
Keyword MFG_COMMENT (type= String)
without a default value.
Keyword MFG_NAME (type= String)
without a default value.
Keyword MFG_TOOL_CORE_DIAMETER (type= LENGTH)
without a default value.
Keyword MFG_CUT_ANGLE (type= ANGLE)
without a default value.
Keyword MFG_CORNER_RAD (type= LENGTH)
without a default value.
Keyword MFG_BODY_DIAM (type= LENGTH)
without a default value.
Keyword MFG_CUT_LENGTH (type= LENGTH)
without a default value.
Keyword MFG_LENGTH (type= LENGTH)
without a default value.
Keyword MFG_OVERALL_LGTH (type= LENGTH)
without a default value.
Keyword MFG_OUTSIDE_DIAM (type= LENGTH)
without a default value.
Keyword MFG_NOMINAL_DIAM (type= LENGTH)
without a default value.
Keyword MFG_TOOTH_MAT (type= String)
without a default value.
Keyword MFG_COMPOSITION (type= String)
without a default value.
Keyword MFG_MACH_QUALITY (type= String)
without a default value.
Keyword MFG_WAY_OF_ROT (type= String)
without a default value.
Keyword MFG_TOOTH_MATDES (type= String)
without a default value.
Keyword MFG_TOOTH_DES (type= String)
without a default value.
Keyword MFG_MAX_PLNG_ANG (type= ANGLE)
without a default value.
Keyword MFG_NB_OF_FLUTES (type= Integer)
without a default value.
Keyword MFG_RADIAL_TL_RAKE_ANG (type= ANGLE)
without a default value.
Keyword MFG_TL_RAKE_ANG (type= ANGLE)
without a default value.
Keyword MFG_MAX_MIL_TIME (type= TIME)
without a default value.
Keyword MFG_MAX_MIL_LENGTH (type= LENGTH)
without a default value.
Keyword MFG_WEIGHT_SNTX (type= String)
without a default value.
Keyword MFG_COOLNT_SNTX (type= String)
without a default value.
Keyword MFG_SZ_ROUGH_GLOBAL (type= ANGULARFEEDRATE)
without a default value.
Keyword MFG_VC_ROUGH_NEW (type= LINEARSPINDLESPEED)
without a default value.
Keyword MFG_SZ_FINISH_GLOBAL (type= ANGULARFEEDRATE)
without a default value.
Keyword MFG_VC_FINISH_NEW (type= LINEARSPINDLESPEED)
without a default value.
Keyword MFG_MAX_FEEDRATE (type= LINEARFEEDRATE)
without a default value.
Keyword MFG_AR_ROUGH (type= LENGTH)
without a default value.
Keyword MFG_AA_ROUGH (type= LENGTH)
without a default value.
Keyword MFG_SZ_ROUGH (type= ANGULARFEEDRATE)
without a default value.
Keyword MFG_VC_ROUGH (type= LINEARFEEDRATE)
without a default value.
Keyword MFG_AR_FINISH (type= LENGTH)
without a default value.
Keyword MFG_AA_FINISH (type= LENGTH)
without a default value.
Keyword MFG_SZ_FINISH (type= ANGULARFEEDRATE)
without a default value.
Keyword MFG_VC_FINISH (type= LINEARFEEDRATE)
without a default value.
Nombre de description: 0
MfgFaceMillTool

Chapitre MfgTSlotterTool
Keyword MFG_BALL_TYPE (type= Boolean)
without a default value.
Keyword MFG_ORIGINAL_ID (type= String)
without a default value.
Keyword MFG_REPOSITORY_SOURCE (type= String)
without a default value.
Keyword MFG_TOOL_NUMBER (type= Integer)
without a default value.
Keyword MFG_COMMENT (type= String)
without a default value.
Keyword MFG_NAME (type= String)
without a default value.
Keyword MFG_CORNER_RAD_2 (type= LENGTH)
without a default value.
Keyword MFG_CORNER_RAD (type= LENGTH)
without a default value.
Keyword MFG_BODY_DIAM (type= LENGTH)
without a default value.
Keyword MFG_LENGTH (type= LENGTH)
without a default value.
Keyword MFG_OVERALL_LGTH (type= LENGTH)
without a default value.
Keyword MFG_NOMINAL_DIAM (type= LENGTH)
without a default value.
Keyword MFG_MACH_QUALITY (type= String)
without a default value.
Keyword MFG_COMPOSITION (type= String)
without a default value.
Keyword MFG_TOOTH_MAT (type= String)
without a default value.
Keyword MFG_WAY_OF_ROT (type= String)
without a default value.
Keyword MFG_TOOTH_MATDES (type= String)
without a default value.
Keyword MFG_TOOTH_DES (type= String)
without a default value.
Keyword MFG_NB_OF_FLUTES (type= Integer)
without a default value.
Keyword MFG_RADIAL_TL_RAKE_ANG (type= ANGLE)
without a default value.
Keyword MFG_TL_RAKE_ANG (type= ANGLE)
without a default value.
Keyword MFG_MAX_MIL_TIME (type= TIME)
without a default value.
Keyword MFG_MAX_MIL_LENGTH (type= LENGTH)
without a default value.
Keyword MFG_WEIGHT_SNTX (type= String)
without a default value.
Keyword MFG_COOLNT_SNTX (type= String)
without a default value.
Keyword MFG_SZ_ROUGH_GLOBAL (type= ANGULARFEEDRATE)
without a default value.
Keyword MFG_VC_ROUGH_NEW (type= LINEARSPINDLESPEED)
without a default value.
Keyword MFG_SZ_FINISH_GLOBAL (type= ANGULARFEEDRATE)
without a default value.
Keyword MFG_VC_FINISH_NEW (type= LINEARSPINDLESPEED)
without a default value.
Keyword MFG_MAX_FEEDRATE (type= LINEARFEEDRATE)
without a default value.
Keyword MFG_AR_ROUGH (type= LENGTH)
without a default value.
Keyword MFG_AA_ROUGH (type= LENGTH)
without a default value.
Keyword MFG_SZ_ROUGH (type= ANGULARFEEDRATE)
without a default value.
Keyword MFG_VC_ROUGH (type= LINEARFEEDRATE)
without a default value.
Keyword MFG_AR_FINISH (type= LENGTH)
without a default value.
Keyword MFG_AA_FINISH (type= LENGTH)
without a default value.
Keyword MFG_SZ_FINISH (type= ANGULARFEEDRATE)
without a default value.
Keyword MFG_VC_FINISH (type= LINEARFEEDRATE)
without a default value.
Nombre de description: 0
MfgTSlotterTool

Chapitre MfgExternalTool
Keyword MFG_DESC_CODE (type= String)
without a default value.
Keyword MFG_ORIGINAL_ID (type= String)
without a default value.
Keyword MFG_REPOSITORY_SOURCE (type= String)
without a default value.
Keyword MFG_TOOL_NUMBER (type= Integer)
without a default value.
Keyword MFG_COMMENT (type= String)
without a default value.
Keyword MFG_NAME (type= String)
without a default value.
Keyword MFG_SHANK_WIDTH (type= LENGTH)
without a default value.
Keyword MFG_SHK_LENGTH_2 (type= LENGTH)
without a default value.
Keyword MFG_SHK_LENGTH_1 (type= LENGTH)
without a default value.
Keyword MFG_SHANK_HEIGHT (type= LENGTH)
without a default value.
Keyword MFG_SHK_CUT_WDTH (type= LENGTH)
without a default value.
Keyword MFG_CLEAR_ANGLE (type= ANGLE)
without a default value.
Keyword MFG_INSERT_LGTH (type= LENGTH)
without a default value.
Keyword MFG_INSERT_ANGLE (type= ANGLE)
without a default value.
Keyword MFG_KAPPA_R (type= ANGLE)
without a default value.
Keyword MFG_HOLDER_CAPAB (type= String)
without a default value.
Keyword MFG_HAND_STYLE (type= String)
without a default value.
Keyword MFG_MAX_REC_DPTH (type= LENGTH)
without a default value.
Keyword MFG_LEADING_ANG (type= ANGLE)
without a default value.
Keyword MFG_TRAILING_ANG (type= ANGLE)
without a default value.
Keyword MFG_MAX_MIL_TIME (type= TIME)
without a default value.
Keyword MFG_MAX_MIL_LENGTH (type= LENGTH)
without a default value.
Keyword MFG_WEIGHT_SNTX (type= String)
without a default value.
Keyword MFG_COOLNT_SNTX (type= String)
without a default value.
Keyword MFG_ISO_CUT_SIZE (type= String)
without a default value.
Keyword MFG_ISO_LENGTH (type= String)
without a default value.
Keyword MFG_ISO_WIDTH (type= String)
without a default value.
Keyword MFG_ISO_HEIGHT (type= String)
without a default value.
Keyword MFG_ISO_DIR (type= String)
without a default value.
Keyword MFG_ISO_CLR_ANG (type= String)
without a default value.
Keyword MFG_ISO_APPR_ANG (type= String)
without a default value.
Keyword MFG_ISO_SHAPE (type= String)
without a default value.
Keyword MFG_ISO_CLAM_SYS (type= String)
without a default value.
Nombre de description: 1
Description Name: T1 Porte-plaquette Extérieur
It's not a subChapter
This Description has no preview!
This Description has no objectFilter!
This Description has no objectName!
It's a instance.
This description is not computed.
Keyword MFG_DESC_CODE (value = NoCode )
Keyword MFG_ORIGINAL_ID (value = null )
Keyword MFG_REPOSITORY_SOURCE (value = null )
Keyword MFG_TOOL_NUMBER (value = 1 )
Keyword MFG_COMMENT (value = null )
Keyword MFG_NAME (value = T1 Porte-plaquette Extérieur )
Keyword (value = 12mm )
Keyword (value = 18mm )
Keyword (value = 80mm )
Keyword (value = 12mm )
Keyword (value = 16mm )
Keyword (value = 7deg )
Keyword (value = 6,45mm )
Keyword (value = 80deg )
Keyword (value = 95deg )
Keyword MFG_HOLDER_CAPAB (value = SURFACE )
Keyword MFG_HAND_STYLE (value = LEFT_HAND )
Keyword (value = 1000mm )
Keyword (value = 90deg )
Keyword (value = 90deg )
Keyword (value = 0s )
Keyword (value = 0mm )
Keyword MFG_WEIGHT_SNTX (value = null )
Keyword MFG_COOLNT_SNTX (value = null )
Keyword MFG_ISO_CUT_SIZE (value = null )
Keyword MFG_ISO_LENGTH (value = null )
Keyword MFG_ISO_WIDTH (value = null )
Keyword MFG_ISO_HEIGHT (value = null )
Keyword MFG_ISO_DIR (value = null )
Keyword MFG_ISO_CLR_ANG (value = null )
Keyword MFG_ISO_APPR_ANG (value = null )
Keyword MFG_ISO_SHAPE (value = null )
Keyword MFG_ISO_CLAM_SYS (value = null )

MfgExternalTool

Chapitre MfgInternalTool
Keyword MFG_DESC_CODE (type= String)
without a default value.
Keyword MFG_ORIGINAL_ID (type= String)
without a default value.
Keyword MFG_REPOSITORY_SOURCE (type= String)
without a default value.
Keyword MFG_TOOL_NUMBER (type= Integer)
without a default value.
Keyword MFG_COMMENT (type= String)
without a default value.
Keyword MFG_NAME (type= String)
without a default value.
Keyword MFG_BODY_DIAM (type= LENGTH)
without a default value.
Keyword MFG_BAR_CUT_RAD (type= LENGTH)
without a default value.
Keyword MFG_BAR_LENGTH_2 (type= LENGTH)
without a default value.
Keyword MFG_BAR_LENGTH_1 (type= LENGTH)
without a default value.
Keyword MFG_SHK_CUT_WDTH (type= LENGTH)
without a default value.
Keyword MFG_CLEAR_ANGLE (type= ANGLE)
without a default value.
Keyword MFG_INSERT_LGTH (type= LENGTH)
without a default value.
Keyword MFG_INSERT_ANGLE (type= ANGLE)
without a default value.
Keyword MFG_KAPPA_R (type= ANGLE)
without a default value.
Keyword MFG_HAND_STYLE (type= String)
without a default value.
Keyword MFG_MIN_DIAM (type= LENGTH)
without a default value.
Keyword MFG_MAX_REC_DPTH (type= LENGTH)
without a default value.
Keyword MFG_MAX_BOR_DPTH (type= LENGTH)
without a default value.
Keyword MFG_LEADING_ANG (type= ANGLE)
without a default value.
Keyword MFG_TRAILING_ANG (type= ANGLE)
without a default value.
Keyword MFG_MAX_MIL_TIME (type= TIME)
without a default value.
Keyword MFG_MAX_MIL_LENGTH (type= LENGTH)
without a default value.
Keyword MFG_WEIGHT_SNTX (type= String)
without a default value.
Keyword MFG_COOLNT_SNTX (type= String)
without a default value.
Keyword MFG_ISO_CUT_SIZE (type= String)
without a default value.
Keyword MFG_ISO_DIR (type= String)
without a default value.
Keyword MFG_ISO_CLR_ANG (type= String)
without a default value.
Keyword MFG_ISO_APPR_ANG (type= String)
without a default value.
Keyword MFG_ISO_SHAPE (type= String)
without a default value.
Keyword MFG_ISO_CLAM_SYS (type= String)
without a default value.
Keyword MFG_ISO_LENGTH (type= String)
without a default value.
Keyword MFG_ISO_BAR_DIA (type= String)
without a default value.
Keyword MFG_ISO_BAR_TYPE (type= String)
without a default value.
Nombre de description: 0
MfgInternalTool

Chapitre MfgGrooveExternalTool
Keyword MFG_ORIGINAL_ID (type= String)
without a default value.
Keyword MFG_REPOSITORY_SOURCE (type= String)
without a default value.
Keyword MFG_TOOL_NUMBER (type= Integer)
without a default value.
Keyword MFG_COMMENT (type= String)
without a default value.
Keyword MFG_NAME (type= String)
without a default value.
Keyword MFG_SHANK_WIDTH (type= LENGTH)
without a default value.
Keyword MFG_SHK_LENGTH_2 (type= LENGTH)
without a default value.
Keyword MFG_SHK_LENGTH_1 (type= LENGTH)
without a default value.
Keyword MFG_SHANK_HEIGHT (type= LENGTH)
without a default value.
Keyword MFG_SHK_CUT_WDTH (type= LENGTH)
without a default value.
Keyword MFG_CLEAR_ANGLE (type= ANGLE)
without a default value.
Keyword MFG_INSERT_WIDTH (type= LENGTH)
without a default value.
Keyword MFG_HAND_ANGLE (type= ANGLE)
without a default value.
Keyword MFG_HAND_STYLE (type= String)
without a default value.
Keyword MFG_MAX_CUT_WDTH (type= LENGTH)
without a default value.
Keyword MFG_MAX_CUT_DPTH (type= LENGTH)
without a default value.
Keyword MFG_GAUGING_ANG (type= ANGLE)
without a default value.
Keyword MFG_MAX_MIL_TIME (type= TIME)
without a default value.
Keyword MFG_MAX_MIL_LENGTH (type= LENGTH)
without a default value.
Keyword MFG_WEIGHT_SNTX (type= String)
without a default value.
Keyword MFG_COOLNT_SNTX (type= String)
without a default value.
Nombre de description: 0
MfgGrooveExternalTool

Chapitre MfgGrooveInternalTool
Keyword MFG_ORIGINAL_ID (type= String)
without a default value.
Keyword MFG_REPOSITORY_SOURCE (type= String)
without a default value.
Keyword MFG_TOOL_NUMBER (type= Integer)
without a default value.
Keyword MFG_COMMENT (type= String)
without a default value.
Keyword MFG_NAME (type= String)
without a default value.
Keyword MFG_BODY_DIAM (type= LENGTH)
without a default value.
Keyword MFG_BAR_CUT_RAD (type= LENGTH)
without a default value.
Keyword MFG_BAR_LENGTH_2 (type= LENGTH)
without a default value.
Keyword MFG_BAR_LENGTH_1 (type= LENGTH)
without a default value.
Keyword MFG_CLEAR_ANGLE (type= ANGLE)
without a default value.
Keyword MFG_INSERT_WIDTH (type= LENGTH)
without a default value.
Keyword MFG_HAND_ANGLE (type= ANGLE)
without a default value.
Keyword MFG_HAND_STYLE (type= String)
without a default value.
Keyword MFG_MIN_DIAM (type= LENGTH)
without a default value.
Keyword MFG_MAX_CUT_WDTH (type= LENGTH)
without a default value.
Keyword MFG_MAX_CUT_DPTH (type= LENGTH)
without a default value.
Keyword MFG_GAUGING_ANG (type= ANGLE)
without a default value.
Keyword MFG_MAX_MIL_TIME (type= TIME)
without a default value.
Keyword MFG_MAX_MIL_LENGTH (type= LENGTH)
without a default value.
Keyword MFG_WEIGHT_SNTX (type= String)
without a default value.
Keyword MFG_COOLNT_SNTX (type= String)
without a default value.
Nombre de description: 0
MfgGrooveInternalTool

Chapitre MfgGrooveFrontalTool
Keyword MFG_ORIGINAL_ID (type= String)
without a default value.
Keyword MFG_REPOSITORY_SOURCE (type= String)
without a default value.
Keyword MFG_TOOL_NUMBER (type= Integer)
without a default value.
Keyword MFG_COMMENT (type= String)
without a default value.
Keyword MFG_NAME (type= String)
without a default value.
Keyword MFG_HAND_STYLE (type= String)
without a default value.
Keyword MFG_SHANK_WIDTH (type= LENGTH)
without a default value.
Keyword MFG_SHK_LENGTH_2 (type= LENGTH)
without a default value.
Keyword MFG_SHK_LENGTH_1 (type= LENGTH)
without a default value.
Keyword MFG_SHANK_HEIGHT (type= LENGTH)
without a default value.
Keyword MFG_SHK_CUT_WDTH (type= LENGTH)
without a default value.
Keyword MFG_CLEAR_ANGLE (type= ANGLE)
without a default value.
Keyword MFG_INSERT_WIDTH (type= LENGTH)
without a default value.
Keyword MFG_MAX_CUT_WDTH (type= LENGTH)
without a default value.
Keyword MFG_MAX_CUT_DPTH (type= LENGTH)
without a default value.
Keyword MFG_MIN_CUT_DIAM (type= LENGTH)
without a default value.
Keyword MFG_MAX_CUT_DIAM (type= LENGTH)
without a default value.
Keyword MFG_GAUGING_ANG (type= ANGLE)
without a default value.
Keyword MFG_MAX_MIL_TIME (type= TIME)
without a default value.
Keyword MFG_MAX_MIL_LENGTH (type= LENGTH)
without a default value.
Keyword MFG_WEIGHT_SNTX (type= String)
without a default value.
Keyword MFG_COOLNT_SNTX (type= String)
without a default value.
Nombre de description: 0
MfgGrooveFrontalTool

Chapitre MfgThreadExternalTool
Keyword MFG_ORIGINAL_ID (type= String)
without a default value.
Keyword MFG_REPOSITORY_SOURCE (type= String)
without a default value.
Keyword MFG_TOOL_NUMBER (type= Integer)
without a default value.
Keyword MFG_COMMENT (type= String)
without a default value.
Keyword MFG_NAME (type= String)
without a default value.
Keyword MFG_SHANK_WIDTH (type= LENGTH)
without a default value.
Keyword MFG_SHK_LENGTH_2 (type= LENGTH)
without a default value.
Keyword MFG_SHK_LENGTH_1 (type= LENGTH)
without a default value.
Keyword MFG_SHANK_HEIGHT (type= LENGTH)
without a default value.
Keyword MFG_SHK_CUT_WDTH (type= LENGTH)
without a default value.
Keyword MFG_INSERT_LGTH (type= LENGTH)
without a default value.
Keyword MFG_HAND_STYLE (type= String)
without a default value.
Keyword MFG_MAX_MIL_TIME (type= TIME)
without a default value.
Keyword MFG_MAX_MIL_LENGTH (type= LENGTH)
without a default value.
Keyword MFG_WEIGHT_SNTX (type= String)
without a default value.
Keyword MFG_COOLNT_SNTX (type= String)
without a default value.
Nombre de description: 0
MfgThreadExternalTool

Chapitre MfgThreadInternalTool
Keyword MFG_ORIGINAL_ID (type= String)
without a default value.
Keyword MFG_REPOSITORY_SOURCE (type= String)
without a default value.
Keyword MFG_TOOL_NUMBER (type= Integer)
without a default value.
Keyword MFG_COMMENT (type= String)
without a default value.
Keyword MFG_NAME (type= String)
without a default value.
Keyword MFG_BODY_DIAM (type= LENGTH)
without a default value.
Keyword MFG_BAR_CUT_RAD (type= LENGTH)
without a default value.
Keyword MFG_BAR_LENGTH_2 (type= LENGTH)
without a default value.
Keyword MFG_BAR_LENGTH_1 (type= LENGTH)
without a default value.
Keyword MFG_INSERT_LGTH (type= LENGTH)
without a default value.
Keyword MFG_HAND_STYLE (type= String)
without a default value.
Keyword MFG_MIN_DIAM (type= LENGTH)
without a default value.
Keyword MFG_MAX_MIL_TIME (type= TIME)
without a default value.
Keyword MFG_MAX_MIL_LENGTH (type= LENGTH)
without a default value.
Keyword MFG_WEIGHT_SNTX (type= String)
without a default value.
Keyword MFG_COOLNT_SNTX (type= String)
without a default value.
Nombre de description: 0
MfgThreadInternalTool

Chapitre MfgWireEDMTool
Keyword MFG_ORIGINAL_ID (type= String)
without a default value.
Keyword MFG_REPOSITORY_SOURCE (type= String)
without a default value.
Keyword MFG_TOOL_NUMBER (type= Integer)
without a default value.
Keyword MFG_COMMENT (type= String)
without a default value.
Keyword MFG_NAME (type= String)
without a default value.
Keyword MFG_NOMINAL_DIAM (type= LENGTH)
without a default value.
Keyword MFG_TOOL_MATERIAL (type= String)
without a default value.
Keyword MFG_MAX_MIL_TIME (type= TIME)
without a default value.
Keyword MFG_MAX_MIL_LENGTH (type= LENGTH)
without a default value.
Keyword MFG_WEIGHT_SNTX (type= String)
without a default value.
Keyword MFG_COOLNT_SNTX (type= String)
without a default value.
Nombre de description: 0
MfgWireEDMTool

Chapitre MfgLaserBeam
Keyword MFG_ORIGINAL_ID (type= String)
without a default value.
Keyword MFG_REPOSITORY_SOURCE (type= String)
without a default value.
Keyword MFG_TOOL_NUMBER (type= Integer)
without a default value.
Keyword MFG_COMMENT (type= String)
without a default value.
Keyword MFG_NAME (type= String)
without a default value.
Keyword MFG_CUT_LENGTH (type= LENGTH)
without a default value.
Keyword MFG_OVERALL_LGTH (type= LENGTH)
without a default value.
Keyword MFG_NOMINAL_DIAM (type= LENGTH)
without a default value.
Keyword MFG_TOOL_MATERIAL (type= String)
without a default value.
Keyword MFG_MAX_MIL_TIME (type= TIME)
without a default value.
Keyword MFG_MAX_MIL_LENGTH (type= LENGTH)
without a default value.
Keyword MFG_WEIGHT_SNTX (type= String)
without a default value.
Keyword MFG_COOLNT_SNTX (type= String)
without a default value.
Nombre de description: 0
MfgLaserBeam

Chapitre NC_INSERTS
Keyword Name (type= String)
without a default value.
Nombre de description: 7
Description Name: MfgDiamondInsert
It's a subChapter
Name of the preview: I_MfgDiamondInsert
This Description has no objectFilter!
Object Name: C:\temp\TEST3.catalog
It's a instance.
This description is not computed.
Keyword Name (value = MfgDiamondInsert )

Description Name: MfgRoundInsert
It's a subChapter
Name of the preview: I_MfgRoundInsert
This Description has no objectFilter!
Object Name: C:\temp\TEST3.catalog
It's a instance.
This description is not computed.
Keyword Name (value = MfgRoundInsert )

Description Name: MfgSquareInsert
It's a subChapter
Name of the preview: I_MfgSquareInsert
This Description has no objectFilter!
Object Name: C:\temp\TEST3.catalog
It's a instance.
This description is not computed.
Keyword Name (value = MfgSquareInsert )

Description Name: MfgTriangularInsert
It's a subChapter
Name of the preview: I_MfgTriangularInsert
This Description has no objectFilter!
Object Name: C:\temp\TEST3.catalog
It's a instance.
This description is not computed.
Keyword Name (value = MfgTriangularInsert )

Description Name: MfgTrigonInsert
It's a subChapter
Name of the preview: I_MfgTrigonInsert
This Description has no objectFilter!
Object Name: C:\temp\TEST3.catalog
It's a instance.
This description is not computed.
Keyword Name (value = MfgTrigonInsert )

Description Name: MfgGrooveInsert
It's a subChapter
Name of the preview: I_MfgGrooveInsert
This Description has no objectFilter!
Object Name: C:\temp\TEST3.catalog
It's a instance.
This description is not computed.
Keyword Name (value = MfgGrooveInsert )

Description Name: MfgThreadInsert
It's a subChapter
Name of the preview: I_MfgThreadInsert
This Description has no objectFilter!
Object Name: C:\temp\TEST3.catalog
It's a instance.
This description is not computed.
Keyword Name (value = MfgThreadInsert )

NC_INSERTS

Chapitre MfgDiamondInsert
Keyword MFG_DESC_CODE (type= String)
without a default value.
Keyword MFG_ORIGINAL_ID (type= String)
without a default value.
Keyword MFG_REPOSITORY_SOURCE (type= String)
without a default value.
Keyword MFG_COMMENT (type= String)
without a default value.
Keyword MFG_NAME (type= String)
without a default value.
Keyword MFG_CLEAR_ANGLE (type= ANGLE)
without a default value.
Keyword MFG_INSERT_THICK (type= LENGTH)
without a default value.
Keyword MFG_INSCRIB_DIAM (type= LENGTH)
without a default value.
Keyword MFG_INSERT_LGTH (type= LENGTH)
without a default value.
Keyword MFG_INSERT_ANGLE (type= ANGLE)
without a default value.
Keyword MFG_NOSE_RADIUS (type= LENGTH)
without a default value.
Keyword MFG_LIFE_TIME (type= TIME)
without a default value.
Keyword MFG_INSERT_MAT (type= String)
without a default value.
Keyword MFG_MACH_QUALITY (type= String)
without a default value.
Keyword MFG_VC_ECROUTAGE_NEW (type= LINEARSPINDLESPEED)
without a default value.
Keyword MFG_VC_ROUGH_NEW (type= LINEARSPINDLESPEED)
without a default value.
Keyword MFG_VC_FINISH_NEW (type= LINEARSPINDLESPEED)
without a default value.
Keyword MFG_MAX_FEEDRATE (type= LINEARFEEDRATE)
without a default value.
Keyword MFG_PP_ECROUTAGE (type= LENGTH)
without a default value.
Keyword MFG_SZ_ECROUTAGE (type= ANGULARFEEDRATE)
without a default value.
Keyword MFG_VC_ECROUTAGE (type= LINEARFEEDRATE)
without a default value.
Keyword MFG_PP_ROUGH (type= LENGTH)
without a default value.
Keyword MFG_SZ_ROUGH (type= ANGULARFEEDRATE)
without a default value.
Keyword MFG_VC_ROUGH (type= LINEARFEEDRATE)
without a default value.
Keyword MFG_SZ_FINISH (type= ANGULARFEEDRATE)
without a default value.
Keyword MFG_VC_FINISH (type= LINEARFEEDRATE)
without a default value.
Keyword MFG_ISO_DIR (type= String)
without a default value.
Keyword MFG_ISO_CUTCOND (type= String)
without a default value.
Keyword MFG_ISO_NOSE_RAD (type= String)
without a default value.
Keyword MFG_ISO_THICK (type= String)
without a default value.
Keyword MFG_ISO_CUT_SIZE (type= String)
without a default value.
Keyword MFG_ISO_TYPE (type= String)
without a default value.
Keyword MFG_ISO_TOL (type= String)
without a default value.
Keyword MFG_ISO_CLR_ANG (type= String)
without a default value.
Keyword MFG_ISO_SHAPE (type= String)
without a default value.
Nombre de description: 0
MfgDiamondInsert

Chapitre MfgRoundInsert
Keyword MFG_DESC_CODE (type= String)
without a default value.
Keyword MFG_ORIGINAL_ID (type= String)
without a default value.
Keyword MFG_REPOSITORY_SOURCE (type= String)
without a default value.
Keyword MFG_COMMENT (type= String)
without a default value.
Keyword MFG_NAME (type= String)
without a default value.
Keyword MFG_CLEAR_ANGLE (type= ANGLE)
without a default value.
Keyword MFG_INSERT_THICK (type= LENGTH)
without a default value.
Keyword MFG_NOSE_RADIUS (type= LENGTH)
without a default value.
Keyword MFG_LIFE_TIME (type= TIME)
without a default value.
Keyword MFG_INSERT_MAT (type= String)
without a default value.
Keyword MFG_MACH_QUALITY (type= String)
without a default value.
Keyword MFG_VC_ECROUTAGE_NEW (type= LINEARSPINDLESPEED)
without a default value.
Keyword MFG_VC_ROUGH_NEW (type= LINEARSPINDLESPEED)
without a default value.
Keyword MFG_VC_FINISH_NEW (type= LINEARSPINDLESPEED)
without a default value.
Keyword MFG_MAX_FEEDRATE (type= LINEARFEEDRATE)
without a default value.
Keyword MFG_PP_ECROUTAGE (type= LENGTH)
without a default value.
Keyword MFG_SZ_ECROUTAGE (type= ANGULARFEEDRATE)
without a default value.
Keyword MFG_VC_ECROUTAGE (type= LINEARFEEDRATE)
without a default value.
Keyword MFG_PP_ROUGH (type= LENGTH)
without a default value.
Keyword MFG_SZ_ROUGH (type= ANGULARFEEDRATE)
without a default value.
Keyword MFG_VC_ROUGH (type= LINEARFEEDRATE)
without a default value.
Keyword MFG_SZ_FINISH (type= ANGULARFEEDRATE)
without a default value.
Keyword MFG_VC_FINISH (type= LINEARFEEDRATE)
without a default value.
Keyword MFG_ISO_DIR (type= String)
without a default value.
Keyword MFG_ISO_CUTCOND (type= String)
without a default value.
Keyword MFG_ISO_NOSE_RAD (type= String)
without a default value.
Keyword MFG_ISO_THICK (type= String)
without a default value.
Keyword MFG_ISO_CUT_SIZE (type= String)
without a default value.
Keyword MFG_ISO_TYPE (type= String)
without a default value.
Keyword MFG_ISO_TOL (type= String)
without a default value.
Keyword MFG_ISO_CLR_ANG (type= String)
without a default value.
Keyword MFG_ISO_SHAPE (type= String)
without a default value.
Nombre de description: 0
MfgRoundInsert

Chapitre MfgSquareInsert
Keyword MFG_DESC_CODE (type= String)
without a default value.
Keyword MFG_ORIGINAL_ID (type= String)
without a default value.
Keyword MFG_REPOSITORY_SOURCE (type= String)
without a default value.
Keyword MFG_COMMENT (type= String)
without a default value.
Keyword MFG_NAME (type= String)
without a default value.
Keyword MFG_CLEAR_ANGLE (type= ANGLE)
without a default value.
Keyword MFG_INSERT_THICK (type= LENGTH)
without a default value.
Keyword MFG_INSCRIB_DIAM (type= LENGTH)
without a default value.
Keyword MFG_INSERT_LGTH (type= LENGTH)
without a default value.
Keyword MFG_NOSE_RADIUS (type= LENGTH)
without a default value.
Keyword MFG_LIFE_TIME (type= TIME)
without a default value.
Keyword MFG_INSERT_MAT (type= String)
without a default value.
Keyword MFG_MACH_QUALITY (type= String)
without a default value.
Keyword MFG_VC_ECROUTAGE_NEW (type= LINEARSPINDLESPEED)
without a default value.
Keyword MFG_VC_ROUGH_NEW (type= LINEARSPINDLESPEED)
without a default value.
Keyword MFG_VC_FINISH_NEW (type= LINEARSPINDLESPEED)
without a default value.
Keyword MFG_MAX_FEEDRATE (type= LINEARFEEDRATE)
without a default value.
Keyword MFG_PP_ECROUTAGE (type= LENGTH)
without a default value.
Keyword MFG_SZ_ECROUTAGE (type= ANGULARFEEDRATE)
without a default value.
Keyword MFG_VC_ECROUTAGE (type= LINEARFEEDRATE)
without a default value.
Keyword MFG_PP_ROUGH (type= LENGTH)
without a default value.
Keyword MFG_SZ_ROUGH (type= ANGULARFEEDRATE)
without a default value.
Keyword MFG_VC_ROUGH (type= LINEARFEEDRATE)
without a default value.
Keyword MFG_SZ_FINISH (type= ANGULARFEEDRATE)
without a default value.
Keyword MFG_VC_FINISH (type= LINEARFEEDRATE)
without a default value.
Keyword MFG_ISO_DIR (type= String)
without a default value.
Keyword MFG_ISO_CUTCOND (type= String)
without a default value.
Keyword MFG_ISO_NOSE_RAD (type= String)
without a default value.
Keyword MFG_ISO_THICK (type= String)
without a default value.
Keyword MFG_ISO_CUT_SIZE (type= String)
without a default value.
Keyword MFG_ISO_TYPE (type= String)
without a default value.
Keyword MFG_ISO_TOL (type= String)
without a default value.
Keyword MFG_ISO_CLR_ANG (type= String)
without a default value.
Keyword MFG_ISO_SHAPE (type= String)
without a default value.
Nombre de description: 0
MfgSquareInsert

Chapitre MfgTriangularInsert
Keyword MFG_DESC_CODE (type= String)
without a default value.
Keyword MFG_ORIGINAL_ID (type= String)
without a default value.
Keyword MFG_REPOSITORY_SOURCE (type= String)
without a default value.
Keyword MFG_COMMENT (type= String)
without a default value.
Keyword MFG_NAME (type= String)
without a default value.
Keyword MFG_CLEAR_ANGLE (type= ANGLE)
without a default value.
Keyword MFG_INSERT_THICK (type= LENGTH)
without a default value.
Keyword MFG_INSCRIB_DIAM (type= LENGTH)
without a default value.
Keyword MFG_INSERT_LGTH (type= LENGTH)
without a default value.
Keyword MFG_NOSE_RADIUS (type= LENGTH)
without a default value.
Keyword MFG_LIFE_TIME (type= TIME)
without a default value.
Keyword MFG_INSERT_MAT (type= String)
without a default value.
Keyword MFG_MACH_QUALITY (type= String)
without a default value.
Keyword MFG_VC_ECROUTAGE_NEW (type= LINEARSPINDLESPEED)
without a default value.
Keyword MFG_VC_ROUGH_NEW (type= LINEARSPINDLESPEED)
without a default value.
Keyword MFG_VC_FINISH_NEW (type= LINEARSPINDLESPEED)
without a default value.
Keyword MFG_MAX_FEEDRATE (type= LINEARFEEDRATE)
without a default value.
Keyword MFG_PP_ECROUTAGE (type= LENGTH)
without a default value.
Keyword MFG_SZ_ECROUTAGE (type= ANGULARFEEDRATE)
without a default value.
Keyword MFG_VC_ECROUTAGE (type= LINEARFEEDRATE)
without a default value.
Keyword MFG_PP_ROUGH (type= LENGTH)
without a default value.
Keyword MFG_SZ_ROUGH (type= ANGULARFEEDRATE)
without a default value.
Keyword MFG_VC_ROUGH (type= LINEARFEEDRATE)
without a default value.
Keyword MFG_SZ_FINISH (type= ANGULARFEEDRATE)
without a default value.
Keyword MFG_VC_FINISH (type= LINEARFEEDRATE)
without a default value.
Keyword MFG_ISO_DIR (type= String)
without a default value.
Keyword MFG_ISO_CUTCOND (type= String)
without a default value.
Keyword MFG_ISO_NOSE_RAD (type= String)
without a default value.
Keyword MFG_ISO_THICK (type= String)
without a default value.
Keyword MFG_ISO_CUT_SIZE (type= String)
without a default value.
Keyword MFG_ISO_TYPE (type= String)
without a default value.
Keyword MFG_ISO_TOL (type= String)
without a default value.
Keyword MFG_ISO_CLR_ANG (type= String)
without a default value.
Keyword MFG_ISO_SHAPE (type= String)
without a default value.
Nombre de description: 1
Description Name: Plaquette triangulaire r 0,8
It's not a subChapter
This Description has no preview!
This Description has no objectFilter!
This Description has no objectName!
It's a instance.
This description is not computed.
Keyword MFG_DESC_CODE (value = NoCode )
Keyword MFG_ORIGINAL_ID (value = null )
Keyword MFG_REPOSITORY_SOURCE (value = null )
Keyword MFG_COMMENT (value = null )
Keyword MFG_NAME (value = Plaquette triangulaire r 0,8 )
Keyword (value = 0deg )
Keyword (value = 4,76mm )
Keyword (value = 9,526mm )
Keyword (value = 16,5mm )
Keyword (value = 0,8mm )
Keyword (value = 0s )
Keyword MFG_INSERT_MAT (value = OTHER )
Keyword MFG_MACH_QUALITY (value = EITHER )
Keyword (value = 0m_mn )
Keyword (value = 0m_mn )
Keyword (value = 0m_mn )
Keyword (value = 100000mm_mn )
Keyword (value = 0mm )
Keyword (value = 0mm_turn )
Keyword (value = 0mm_mn )
Keyword (value = 0mm )
Keyword (value = 0mm_turn )
Keyword (value = 0mm_mn )
Keyword (value = 0mm_turn )
Keyword (value = 0mm_mn )
Keyword MFG_ISO_DIR (value = null )
Keyword MFG_ISO_CUTCOND (value = null )
Keyword MFG_ISO_NOSE_RAD (value = null )
Keyword MFG_ISO_THICK (value = null )
Keyword MFG_ISO_CUT_SIZE (value = null )
Keyword MFG_ISO_TYPE (value = null )
Keyword MFG_ISO_TOL (value = null )
Keyword MFG_ISO_CLR_ANG (value = null )
Keyword MFG_ISO_SHAPE (value = null )

MfgTriangularInsert

Chapitre MfgTrigonInsert
Keyword MFG_DESC_CODE (type= String)
without a default value.
Keyword MFG_ORIGINAL_ID (type= String)
without a default value.
Keyword MFG_REPOSITORY_SOURCE (type= String)
without a default value.
Keyword MFG_COMMENT (type= String)
without a default value.
Keyword MFG_NAME (type= String)
without a default value.
Keyword MFG_CLEAR_ANGLE (type= ANGLE)
without a default value.
Keyword MFG_INSERT_THICK (type= LENGTH)
without a default value.
Keyword MFG_INSCRIB_DIAM (type= LENGTH)
without a default value.
Keyword MFG_INSERT_LGTH (type= LENGTH)
without a default value.
Keyword MFG_NOSE_RADIUS (type= LENGTH)
without a default value.
Keyword MFG_LIFE_TIME (type= TIME)
without a default value.
Keyword MFG_INSERT_MAT (type= String)
without a default value.
Keyword MFG_MACH_QUALITY (type= String)
without a default value.
Keyword MFG_VC_ECROUTAGE_NEW (type= LINEARSPINDLESPEED)
without a default value.
Keyword MFG_VC_ROUGH_NEW (type= LINEARSPINDLESPEED)
without a default value.
Keyword MFG_VC_FINISH_NEW (type= LINEARSPINDLESPEED)
without a default value.
Keyword MFG_MAX_FEEDRATE (type= LINEARFEEDRATE)
without a default value.
Keyword MFG_PP_ECROUTAGE (type= LENGTH)
without a default value.
Keyword MFG_SZ_ECROUTAGE (type= ANGULARFEEDRATE)
without a default value.
Keyword MFG_VC_ECROUTAGE (type= LINEARFEEDRATE)
without a default value.
Keyword MFG_PP_ROUGH (type= LENGTH)
without a default value.
Keyword MFG_SZ_ROUGH (type= ANGULARFEEDRATE)
without a default value.
Keyword MFG_VC_ROUGH (type= LINEARFEEDRATE)
without a default value.
Keyword MFG_SZ_FINISH (type= ANGULARFEEDRATE)
without a default value.
Keyword MFG_VC_FINISH (type= LINEARFEEDRATE)
without a default value.
Keyword MFG_ISO_DIR (type= String)
without a default value.
Keyword MFG_ISO_CUTCOND (type= String)
without a default value.
Keyword MFG_ISO_NOSE_RAD (type= String)
without a default value.
Keyword MFG_ISO_THICK (type= String)
without a default value.
Keyword MFG_ISO_CUT_SIZE (type= String)
without a default value.
Keyword MFG_ISO_TYPE (type= String)
without a default value.
Keyword MFG_ISO_TOL (type= String)
without a default value.
Keyword MFG_ISO_CLR_ANG (type= String)
without a default value.
Keyword MFG_ISO_SHAPE (type= String)
without a default value.
Nombre de description: 0
MfgTrigonInsert

Chapitre MfgGrooveInsert
Keyword MFG_GROOVE_TYPE (type= String)
without a default value.
Keyword MFG_ORIGINAL_ID (type= String)
without a default value.
Keyword MFG_REPOSITORY_SOURCE (type= String)
without a default value.
Keyword MFG_COMMENT (type= String)
without a default value.
Keyword MFG_NAME (type= String)
without a default value.
Keyword MFG_CLEAR_ANGLE (type= ANGLE)
without a default value.
Keyword MFG_INSERT_THICK (type= LENGTH)
without a default value.
Keyword MFG_NOSE_RAD_2 (type= LENGTH)
without a default value.
Keyword MFG_NOSE_RAD_1 (type= LENGTH)
without a default value.
Keyword MFG_FLANK_ANG_2 (type= ANGLE)
without a default value.
Keyword MFG_FLANK_ANG_1 (type= ANGLE)
without a default value.
Keyword MFG_BOTTOM_ANGLE (type= ANGLE)
without a default value.
Keyword MFG_INSERT_WIDTH (type= LENGTH)
without a default value.
Keyword MFG_INSERT_HEIGH (type= LENGTH)
without a default value.
Keyword MFG_INSERT_MAT (type= String)
without a default value.
Keyword MFG_MACH_QUALITY (type= String)
without a default value.
Keyword MFG_VC_ECROUTAGE_NEW (type= LINEARSPINDLESPEED)
without a default value.
Keyword MFG_VC_ROUGH_NEW (type= LINEARSPINDLESPEED)
without a default value.
Keyword MFG_VC_FINISH_NEW (type= LINEARSPINDLESPEED)
without a default value.
Keyword MFG_MAX_FEEDRATE (type= LINEARFEEDRATE)
without a default value.
Keyword MFG_PP_ECROUTAGE (type= LENGTH)
without a default value.
Keyword MFG_SZ_ECROUTAGE (type= ANGULARFEEDRATE)
without a default value.
Keyword MFG_VC_ECROUTAGE (type= LINEARFEEDRATE)
without a default value.
Keyword MFG_PP_ROUGH (type= LENGTH)
without a default value.
Keyword MFG_SZ_ROUGH (type= ANGULARFEEDRATE)
without a default value.
Keyword MFG_VC_ROUGH (type= LINEARFEEDRATE)
without a default value.
Keyword MFG_SZ_FINISH (type= ANGULARFEEDRATE)
without a default value.
Keyword MFG_VC_FINISH (type= LINEARFEEDRATE)
without a default value.
Nombre de description: 0
MfgGrooveInsert

Chapitre MfgThreadInsert
Keyword MFG_MACH_TYPE (type= String)
without a default value.
Keyword MFG_ORIGINAL_ID (type= String)
without a default value.
Keyword MFG_REPOSITORY_SOURCE (type= String)
without a default value.
Keyword MFG_COMMENT (type= String)
without a default value.
Keyword MFG_NAME (type= String)
without a default value.
Keyword MFG_INSERT_THICK (type= LENGTH)
without a default value.
Keyword MFG_NOSE_RADIUS (type= LENGTH)
without a default value.
Keyword MFG_TOOTH_H (type= LENGTH)
without a default value.
Keyword MFG_TOOTH_Z (type= LENGTH)
without a default value.
Keyword MFG_TOOTH_X (type= LENGTH)
without a default value.
Keyword MFG_HAND_STYLE (type= String)
without a default value.
Keyword MFG_THREAD_ANGLE (type= ANGLE)
without a default value.
Keyword MFG_INSERT_LGTH (type= LENGTH)
without a default value.
Keyword MFG_PITCH_NUMBER (type= Real)
without a default value.
Keyword MFG_PITCH_OF_THREAD (type= LENGTH)
without a default value.
Keyword MFG_THREAD_DEF (type= String)
without a default value.
Keyword MFG_THREAD_PROF (type= String)
without a default value.
Keyword MFG_LIFE_TIME (type= TIME)
without a default value.
Keyword MFG_INSERT_MAT (type= String)
without a default value.
Keyword MFG_MACH_QUALITY (type= String)
without a default value.
Keyword MFG_VC_ECROUTAGE_NEW (type= LINEARSPINDLESPEED)
without a default value.
Keyword MFG_VC_ROUGH_NEW (type= LINEARSPINDLESPEED)
without a default value.
Keyword MFG_VC_FINISH_NEW (type= LINEARSPINDLESPEED)
without a default value.
Keyword MFG_MAX_FEEDRATE (type= LINEARFEEDRATE)
without a default value.
Keyword MFG_PP_ECROUTAGE (type= LENGTH)
without a default value.
Keyword MFG_SZ_ECROUTAGE (type= ANGULARFEEDRATE)
without a default value.
Keyword MFG_VC_ECROUTAGE (type= LINEARFEEDRATE)
without a default value.
Keyword MFG_PP_ROUGH (type= LENGTH)
without a default value.
Keyword MFG_SZ_ROUGH (type= ANGULARFEEDRATE)
without a default value.
Keyword MFG_VC_ROUGH (type= LINEARFEEDRATE)
without a default value.
Keyword MFG_SZ_FINISH (type= ANGULARFEEDRATE)
without a default value.
Keyword MFG_VC_FINISH (type= LINEARFEEDRATE)
without a default value.
Nombre de description: 0
MfgThreadInsert

Chapitre NC_TOOL_ASSEMBLIES
Keyword Name (type= String)
without a default value.
Nombre de description: 2
Description Name: MfgMillAndDrillToolAssembly
It's a subChapter
Name of the preview: I_MfgMillAndDrillToolAssembly
This Description has no objectFilter!
Object Name: C:\temp\TEST3.catalog
It's a instance.
This description is not computed.
Keyword Name (value = MfgMillAndDrillToolAssembly )

Description Name: MfgLatheToolAssembly
It's a subChapter
Name of the preview: I_MfgLatheToolAssembly
This Description has no objectFilter!
Object Name: C:\temp\TEST3.catalog
It's a instance.
This description is not computed.
Keyword Name (value = MfgLatheToolAssembly )

NC_TOOL_ASSEMBLIES

Chapitre MfgMillAndDrillToolAssembly
Keyword MFG_TOOL_NAME (type= String)
without a default value.
Keyword MFG_HOLDER_STAGES (type= Integer)
without a default value.
Keyword MFG_ORIGINAL_ID (type= String)
without a default value.
Keyword MFG_REPOSITORY_SOURCE (type= String)
without a default value.
Keyword MFG_TOOL_NUMBER (type= Integer)
without a default value.
Keyword MFG_COMMENT (type= String)
without a default value.
Keyword MFG_NAME (type= String)
without a default value.
Keyword MFG_HOLDER_LENGTH_3 (type= LENGTH)
without a default value.
Keyword MFG_HOLDER_LENGTH_2 (type= LENGTH)
without a default value.
Keyword MFG_HOLDER_LENGTH_1 (type= LENGTH)
without a default value.
Keyword MFG_CONE_DIAMETER_5 (type= LENGTH)
without a default value.
Keyword MFG_CONE_DIAMETER_4 (type= LENGTH)
without a default value.
Keyword MFG_CONE_DIAMETER_3 (type= LENGTH)
without a default value.
Keyword MFG_DIAMETER_6 (type= LENGTH)
without a default value.
Keyword MFG_DIAMETER_5 (type= LENGTH)
without a default value.
Keyword MFG_DIAMETER_4 (type= LENGTH)
without a default value.
Keyword MFG_CONE_DIAMETER_2 (type= LENGTH)
without a default value.
Keyword MFG_CONE_DIAMETER_1 (type= LENGTH)
without a default value.
Keyword MFG_CONE_LENGTH (type= LENGTH)
without a default value.
Keyword MFG_ORIENT_ANGLE (type= ANGLE)
without a default value.
Keyword MFG_TL_SET_Z (type= LENGTH)
without a default value.
Keyword MFG_TL_SET_Y (type= LENGTH)
without a default value.
Keyword MFG_TL_SET_X (type= LENGTH)
without a default value.
Keyword MFG_TL_SET_LGTH (type= LENGTH)
without a default value.
Keyword MFG_DIAMETER_3 (type= LENGTH)
without a default value.
Keyword MFG_DIAMETER_2 (type= LENGTH)
without a default value.
Keyword MFG_DIAMETER_1 (type= LENGTH)
without a default value.
Keyword MFG_ASS_GAGE_2 (type= LENGTH)
without a default value.
Keyword MFG_ASS_GAGE_1 (type= LENGTH)
without a default value.
Keyword MFG_TURRET_NUMBER (type= Integer)
without a default value.
Keyword MFG_TOOL_ASS_POWER (type= String)
without a default value.
Keyword MFG_NB_OF_COMP (type= Integer)
without a default value.
Nombre de description: 0
MfgMillAndDrillToolAssembly

Chapitre MfgLatheToolAssembly
Keyword MFG_TOOL_NAME (type= String)
without a default value.
Keyword MFG_INSERT_NAME (type= String)
without a default value.
Keyword MFG_MACHINE_COMP (type= String)
without a default value.
Keyword MFG_ORIGINAL_ID (type= String)
without a default value.
Keyword MFG_REPOSITORY_SOURCE (type= String)
without a default value.
Keyword MFG_TOOL_NUMBER (type= Integer)
without a default value.
Keyword MFG_COMMENT (type= String)
without a default value.
Keyword MFG_NAME (type= String)
without a default value.
Keyword MFG_TL_SETUP_ANG (type= ANGLE)
without a default value.
Keyword MFG_TL_SET_Z (type= LENGTH)
without a default value.
Keyword MFG_TL_SET_Y (type= LENGTH)
without a default value.
Keyword MFG_TL_SET_X (type= LENGTH)
without a default value.
Keyword MFG_TOOL_INVERT (type= Boolean)
without a default value.
Keyword MFG_OUTP_PREF_3 (type= String)
without a default value.
Keyword MFG_OUTP_PREF_2 (type= String)
without a default value.
Keyword MFG_OUTP_PREF_1 (type= String)
without a default value.
Keyword MFG_TURRET_NUMBER (type= Integer)
without a default value.
Keyword MFG_TOOL_ASS_POWER (type= String)
without a default value.
Keyword MFG_NB_OF_COMP (type= Integer)
without a default value.
Nombre de description: 1
Description Name: Outil assemblé de tournage.1
It's not a subChapter
This Description has no preview!
This Description has no objectFilter!
This Description has no objectName!
It's a instance.
This description is not computed.
Keyword MFG_TOOL_NAME (value = T1 Porte-plaquette Extérieur )
Keyword MFG_INSERT_NAME (value = Plaquette triangulaire r 0,8 )
Keyword MFG_MACHINE_COMP (value = MFG_UNDEFINED )
Keyword MFG_ORIGINAL_ID (value = null )
Keyword MFG_REPOSITORY_SOURCE (value = null )
Keyword MFG_TOOL_NUMBER (value = 1 )
Keyword MFG_COMMENT (value = null )
Keyword MFG_NAME (value = Outil assemblé de tournage.1 )
Keyword (value = 0deg )
Keyword (value = 0mm )
Keyword (value = 0mm )
Keyword (value = 0mm )
Keyword MFG_TOOL_INVERT (value = False )
Keyword MFG_OUTP_PREF_3 (value = MfgNone )
Keyword MFG_OUTP_PREF_2 (value = MfgNone )
Keyword MFG_OUTP_PREF_1 (value = MfgNone )
Keyword MFG_TURRET_NUMBER (value = 1 )
Keyword MFG_TOOL_ASS_POWER (value = MFG_POWERED )
Keyword MFG_NB_OF_COMP (value = 3 )

MfgLatheToolAssembly

Chapitre NC_CORRECTORS
Keyword MFG_TOOL_NAME (type= String)
without a default value.
Keyword MFG_MCD_SIMULATION_LENGTH (type= LENGTH)
without a default value.
Keyword MFG_MCD_SIMULATION_RADIUS (type= LENGTH)
without a default value.
Keyword MFG_CMP_TL_DIAM (type= LENGTH)
without a default value.
Keyword MFG_RAD_NUM (type= Integer)
without a default value.
Keyword MFG_LNG_NUM (type= Integer)
without a default value.
Keyword MFG_SITE_NUM (type= Integer)
without a default value.
Keyword MFG_SITE_TYP (type= String)
without a default value.
Nombre de description: 1
Description Name: NC_CORRECTORS.2
It's not a subChapter
This Description has no preview!
This Description has no objectFilter!
This Description has no objectName!
It's a instance.
This description is not computed.
Keyword MFG_TOOL_NAME (value = T1 Porte-plaquette Extérieur )
Keyword (value = 0mm )
Keyword (value = 0mm )
Keyword (value = 0mm )
Keyword MFG_RAD_NUM (value = 1 )
Keyword MFG_LNG_NUM (value = 9 )
Keyword MFG_SITE_NUM (value = 9 )
Keyword MFG_SITE_TYP (value = P9 )

NC_CORRECTORS

mercredi 1 février 2006 à 20:06:09 | Re : Plusieurs SPLIT consécutifs

CanisLupus

3748 msg

Hou là !!!

C'est un fichier issu de quoi ?
Un conseil, perso, je commencerais par éliminer tous les commentaires du genre :

It's not a subChapter
This Description has no preview!
This Description has no objectFilter!
This Description has no objectName!
It's a instance.
It's a subChapter
This description is not computed.
without a default value.

Et j'en oublie sùrement. Ca peut se faire avec la fonction replace ou alors, tu testes chaque contenu de ligne dans ta boucle afin de ne pas concaténer ces lignes dans ta variable Texte.
Ensuite seulement, les splits.

-------------------------------------------------
Dresseur de puces, .... normal pour un loup

jeudi 2 février 2006 à 10:45:13 | Re : Plusieurs SPLIT consécutifs

benoit_epfl

7 msg

C'est un fichier issu de CATIA, un soft de CAO édité par Dassault Systèmes...
C'est la sauvegarde en fichier texte d'un catalogue d'outils pour l'usinage...
C'est assez incroyable qu'ils n'aient pas développé une sortie XML, mais bon...

En ce qui concerne les commentaires, c'est clair que je vais les enlever, mis à part It's a subChapter, qui m'informe si la description en cours est un chapitre ou un objet à inclure dans ma structure...

J'ai encore pas mal de boulot de compréhension du fichier, et je me perds un peu à force de faire des boucles!!

Merci de ton soutien!!!

Cette discussion est classée dans : texte, split, ts, textstream, tablochapitre

Répondre à ce message

Sujets en rapport avec ce message

VB.Net Fonction Split [ par JeffC1977 ] Dans mon Form_Load je créé un tableau à partir d'un fichier texte. L'enssemble de mes variables sont en StringTableau(i) = FichierTexteLe fichier text Trouver puis prendre du texte avec split() ? [ par mySQL15 ] Bonsoir tous le monde,Et ce que quelqu'un pourrais me montrés comment prendre une partie du texte d'une textbox?Par exemple j'affiche une source d'une Extraire le texte d'un champ d'un écran via les API [ par jil2401 ] Bonjour à tous,Je m'excuse mais je suis un peu novice en API et en programmation.Je cherche comment faire pour récupérer le texte contenu dans un cham Incrustation de texte dans une image [ par Lolobibop ] Bonjour,J'ai un form avec une picturebox. Je cherche à incruster du texte dans cette image pour pouvoir par la suite la sauvegarder.Quelqu'un saurait impression via adresse IP [ par tonitto85 ] Bonjour tous le monde.en fait je suis débutant dans le domaine de la programmation, et je veux bien la pratiquer dans ma vie qutidienne (au travail).m selection ligne dans fichier [ par tortuedu74 ] Bonjour, Je voudrais savoir comment, quand j'insère du texte dans un fichier via du code vb.net, comment sélectionner la ligne a laquelle je souhaite Choisir la couleur de fond et de texte d'une seule ligne d'une listview [ par jytest ] Re-bonjour, Me revoilà avec ma listview... Je souhaiterais maintenant que la dernière ligne de ma listview1 soit : - avec un fond en rouge (fond) - supprimer derniere ligne d'un fichier texte [ par tortuedu74 ] S'il vous plais, en vb.net, est-ce-que quelqu'un pourrait m'aider a trouver une fonction qui supprimerai la dernière ligne d'un fichier txt?J'ai déjà deplacer mes fichiers texte, image, video vers des dossiers de mon choix en vb.net 2005 [ par brmdevinci ] SVP vous pouvez me dir comment deplacer mes fichiers qq soit leurs nature , texte, image ,video, ... vers des dossiers que je choisi moi meme en vb.ne

Livres en rapport

Illustrator 10 pour PC/MAC

Algorithmique du texte

Works 2000 vol.2

Javascript

Tous les livres pour Texte, Split, Ts, Textstream, Tablochapitre

Nos sponsors

Derniers Blogs

[WP7] DYNAMICALLY CHANGE STARTUP PAGE par KooKiz

SESSION SILVERLIGHT 5 3D : SLIDES ET DEMOS par Groc

[TECHDAYS 2012] SESSION WEBMATRIX 2 : LE COUTEAU SUISSE GRATUIT POUR VOS DéVELOPPEMENTS WEB - SLIDES par gpommier

[SHAREPOINT] LES SESSIONS TECHDAYS 2012. par Patrick Guimonet

TECHDAYS PARIS 2012 : SESSION PLEINIèRE JOUR 3 par ROMELARD Fabrice

Forum

RE : LISTER KEYS.KEY par ucfoutu

RE : LISTER KEYS.KEY par Renfield

RE : RECORDSET DE VB6 à VB2010...GRRRRRRRR par Renfield

LISTER KEYS.KEY par Onin42

Côté IT

Offres d'emploi

Formations Video

Appels d'offres

Passerelle Pericles sur site Joomla 17
Budget : 499€
Infogerance Serveur Debian Linux
Budget : 2 400€
Developpeur applications iphone - ipad - android
Budget : 800€

Logiciels

Tribler (2012)
TRIBLER (2012)

Tribler est un client pair à pair (P2P/Peer-to-Peer) open source avec la capacité de regarder des...

Cliquez pour télécharger Tribler
OneSwarm (2012)
ONESWARM (2012)

Le peer-to-peer qui protège votre vie privée, c'est OneSwarm. Ce logiciel de peer-to-peer crypté...

Cliquez pour télécharger OneSwarm
PONAMEDIA PREMIUM - HELLLOOO FLASH DEMO (V8.4)
PONAMEDIA PREMIUM - HELLLOOO FLASH DEMO (V8.4)

PONAMEDIA TV DEVIENS HELLLOOO FLASH LA TV SUR VOTRE ORDINATEUR. Toute une plateforme Multi...

Cliquez pour télécharger PONAMEDIA PREMIUM - HELLLOOO FLASH DEMO
Academy System (17.2.1.0)
ACADEMY SYSTEM (17.2.1.0)

Logiciel de gestion des établissements. - élèves/étudiants (inscription, dossier, absence...) -...

Cliquez pour télécharger Academy System
Easy-Planning (1.0.0.1)
EASY-PLANNING (1.0.0.1)

Basé sur les mêmes principes que MyPlanning, Easy-Planning permet de créer des plannings sous la ...

Cliquez pour télécharger Easy-Planning